ty_ty13

iTrader: (42)

i used a 2'' air saw.... cut it like butter

Urban Legend

iTrader: (5)

You will also need a couple of Red Bull 4 packs.

JD_Z28

iTrader: (19)

I did mine last week and noticed theres a huge gap from the bumper to intercooler. By looking at you guys pics its hard to tell if its just my car or if its normal? How big is the gap on yours?

Blown SS

iTrader: (13)

I pushed mine towards the front as far as possible, and there is some gap. Still looks fine to me though

JD_Z28

iTrader: (19)

Mine is mounted as far forward as I can get it and I still have around a 6 inch gap. Is yours about the same?

WestSide

iTrader: (6)

My setup has a 1.5" bracket on the backside of the intercooler that I bolted to the FRONT of my bumper support. I realize the bumper support is dead weight ...but the intercooler doesn't sit a foot behind where the stock grille would normally be.

JD_Z28

iTrader: (19)

How big of a gap is there on yours. Mine is about 6 inches. Heres a few pics, but you can't really tell because it dark.

WestSide

iTrader: (6)

My intercooler is actually touching the bumper where I cut the grille shape out. If you look at my sig picture really good, you can see that it is touching in four places(corners of the intercooler basically), leaving about a 3" gap between the intercooler and the very front most point, but that's just caused from the shape of the front bumper cover.

HILL_SS

iTrader: (4)

What kind (brand) of intercooler are you all using in your setups? Also what sizes are you guys running? In all the pics they look remotly the same size but some a little different than others...Just wondering before I make my purchase.

Country Boy

iTrader: (24)

ifryrice

iTrader: (10)

car looks like its commin together nice country boy!

JD_Z28

iTrader: (19)

How did you mount that mesh to your front grille? I'm gonna be getting some soon.

Country Boy

iTrader: (24)

The side grills are wired in. Drilled really small holes and used some safety wire. The center is hot glued.

JD_Z28

iTrader: (19)

Thanks

Reject

iTrader: (24)

same question

Websy21

iTrader: (34)

This is exactly how I did it on my eclipse, it too has a similar wide mouth opening. I will be doing a front mount turbo in my camaro this winter but I have a A2W for it and will be hidden.

OreoLt1

iTrader: (11)

I left the tabs on the bumper b/c I still don't know what grille to go with.

Reject

iTrader: (24)

where are you guy's getting them at? i've searched on ebay and found some but dont knwo which one's they are, are they godspeed brand?

OreoLt1

iTrader: (11)

I got my cooler off of ebay from user "cxracing". They have a website(cxracing.com) where they sell the same coolers as on ebay but on ebay for a little cheaper. The size is 31x12x4