This looks really good. You know what we all want when you get it finished.

Pics, dyno #s, and track times!

 

he is scared of the track been trying to get him ready to go forever! he doesnt want to get beat by me

 

....Or maybe I just don't rush things like you so I don't end up at the track with a tire falling off.

I need to save for a new drive shaft and tq arm for my 9" thats sitting in my garage. Then for some rear prostars and stickys. No going out on street tires with 550ish whp like someone I know

 

Remember not to reuse your stock wheel studs either when you put in the 9 and some sticky tires on the car.

 

keep us posted,what internal work u have and how many psi will u be running

 

That will be part 2 of my build.

Stock bottom end and will run 8 psi.

 

who did that i know i didnt i used the ones strait from moser.....ohh and that wasnt rushing it that was going to the track to have fun hopeing that someone there would have tires that i could use. just didnt put the right lug nuts on...... you can always go to see your MPH and base your quater of that

 

Whatever you say rush master flash.

 

5 months j/k hahah

 

i might be stupid, but where you mount the wastegate?

 

Sometimes when you order quality parts (heads/K member) and dont rush people it takes time. I also did my fuel system the same time as the turbo kit, not to mention I won't have to refab my piping 15 times. You will also not see me spinning all the way down the track on 265 street tires running high 11s at 200mph.....or my car sitting on the starting line on brake rotors.

Please stop trolling my thread now so it gets back on track.

 

Look at the pics.

http://calibercustoms.com/cagel_camaro.htm

 

Wrong .....you may not have to refab your pipeing but you will be redoing your fuel system! but that is all i could aford at the time just like you .....!! i wanted to see 620 on the 6speed and 10 bolt...

we all rush cmon maing....

 

I am in no rush what so ever. Good call on the fuel system

/BS

 

ohh well were still going to have fun on saturday~~!!
will you be in my kookabanger club?? if so post it in your sig!

 

http://calibercustoms.com/cagel_camaro.htm

Big thanks To Matt at Caliber Customs for getting my car done in a SUPER timely manner. Only a couple weeks start to finish---kmember/heads/cam/fuel/turbo/guages/etc.

He said it fired right up and has a mild lope to it!

Going to get tuned on Saturday at Synergy. Hope to post graphs and dyno pulls once I get back!

 

still ugly as **** no matter what you do...

 

woooooooooow i thought you were done with that talk you must be really fat or dont get ***** to be this mad! or your just jelious! i have a turbo set up and i am!

 

I smell your ban brewing............Tick tock tick tock

 

Kit looks great!