gas or go FI? i know i wanna know 
Well, IT HAS BEGUN!!!
UPDATE!
Diamonds are and they are SO sweet!!!!!! ITs almost a shame to hide them under the heads but whatever, can't make the block out of clear aluminum can we?
Anyways, car is moving along. Got into a little stand still trying to figure out what i was gonna do for fuel/ignition. Not 100% sure on ignition but fuel is on order. MAgnafuel stuff with a sump kit for hte 98 tank. Will have pics of that stuff in a bit, should be arriving today, well, hopefully!
Anyways, pistons are completely custom pieces. Coated tops and sides, redesigned primary ring landing height, etc... *should* yeild a C.R. Of about 8.7:1.
Motor is prepped and ready for the new pistons. She is now at 410ci due to the honing/boring, so she is a little different them normal and has more cubes (though barely any really! ) to get here going.
Diamonds are and they are SO sweet!!!!!! ITs almost a shame to hide them under the heads but whatever, can't make the block out of clear aluminum can we?
Anyways, car is moving along. Got into a little stand still trying to figure out what i was gonna do for fuel/ignition. Not 100% sure on ignition but fuel is on order. MAgnafuel stuff with a sump kit for hte 98 tank. Will have pics of that stuff in a bit, should be arriving today, well, hopefully!
Anyways, pistons are completely custom pieces. Coated tops and sides, redesigned primary ring landing height, etc... *should* yeild a C.R. Of about 8.7:1.
Motor is prepped and ready for the new pistons. She is now at 410ci due to the honing/boring, so she is a little different them normal and has more cubes (though barely any really!
) to get here going.
Originally Posted by cjmatt
please put on a stock ss hood and sell that to someone else. Your car has hit the point that the goofy aftermarket hood just takes away from the cage
it really needs a diff hood though
it really needs a diff hood though
Originally Posted by obZidian
thanks... right?! there is usually a water to air in that location or the tubing for the w2a!!
yeah, i really like this hood too. It has always got my eye and since i like to be different, it fits... to be honest, i love cause it remnds me of the knight rider...
thanks again!!
yeah, i really like this hood too. It has always got my eye and since i like to be different, it fits... to be honest, i love cause it remnds me of the knight rider...
thanks again!!
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo yeah, if you are referring to those little "slices" missing from the piston top, those are valve relieves and are meant to keep me out of trouble.
As for the poweradder, well, i wouldn't be spending so much time in the FI section, asking all sorts of n00bie questions if i was gonna go Salsa know would i?
Besides, *cough! *8.7cr* cough!*
Hmmhmm.... she'll be a single turbo car, a/c running nice a cool (well that is if i have enough mula to fix the damm compressor when all is said and done) and running on DR's. Fuel is on order, just need to figure out what the hell im gonna do for tunning.
96lbs injectors and drive box, matched with a 99+pcm/harness, tuned by hptuners 3 bar map and 4l80e tables... OR a BS3 with those 96's, controlling the 4l80e with an additional 80e wiring harness..
hmmm about $3500.00 versus half that... but can it work?! Now ya'll are understanding my issue?!
Drivetrains is done, motor is finally complete, just waiting for parts to trickle in and see what she'll do.
As for the poweradder, well, i wouldn't be spending so much time in the FI section, asking all sorts of n00bie questions if i was gonna go Salsa know would i?
Besides, *cough! *8.7cr* cough!*
Hmmhmm.... she'll be a single turbo car, a/c running nice a cool (well that is if i have enough mula to fix the damm compressor when all is said and done) and running on DR's. Fuel is on order, just need to figure out what the hell im gonna do for tunning.
96lbs injectors and drive box, matched with a 99+pcm/harness, tuned by hptuners 3 bar map and 4l80e tables... OR a BS3 with those 96's, controlling the 4l80e with an additional 80e wiring harness..
hmmm about $3500.00 versus half that... but can it work?! Now ya'll are understanding my issue?!
Drivetrains is done, motor is finally complete, just waiting for parts to trickle in and see what she'll do.
Well, fuel stuff came in, had a little bit of worries on what exactly should i need and/or what works and what doesn't. Took a eduacted guess and went with a single 4303 magnafuel pump, their two port regulator, boost referenced, and a pair of their pre/post filters. Fittings are on their way and the lines and sump kit are around, maybe i'll get a pi of that too..
anyways, almost done, this project has cost a million, gazillion, bazillion dollars more than what i had originally opted to do, which was a simple spring, tune job. Oh well, cant take it all back now can i?!
anyways, almost done, this project has cost a million, gazillion, bazillion dollars more than what i had originally opted to do, which was a simple spring, tune job. Oh well, cant take it all back now can i?!
dude, i would be so flaired after spending that much cash on a set of pistons that someone a diamond had a little "fumble-laiya" and put them back in the box. Heads would be rolling or just another set being made a we speak! ")
yeah, im very happy with the way it LOOKS, since i have never seen it in person!! They have made a few for other members and i have been impressed.
Anyways, anyone know where i can get a 99+pcm? Anyone have one laying around....
Anyways, anyone know where i can get a 99+pcm? Anyone have one laying around....
UPDATE:
Well, got some more stuff in. Man, do i love getting new stuff!! The cost of this build is retarded!! IFs funny how a bunch of 299.99's and 179.99's, which look ok, adds up to thousands when you add them all up on a receipt!!
Anyways, got my injectors, 160lbs. HAD to finally order the BS3, big dent in the wallet but it was almost inevitable. We established a few plans of attack and all were right around the same price, with what i needed, so the bs3 seemed logical and with the injectors, the bs3 was probably my only choice.
Anyways, got a flaming river battery battery kill swith, battery relocation kit, ATI harmionic balancer and my SWEET intake elbow. (Mods, it has a sticker from a non-vendor, so if you wish, let me know and i'll remove it )
The intake elbow welds are very, very nice. Its gonna look sweet after powdercoating.
anyways, what do ya'll think? Project is moving thats for sure. Expensive, but i hope when its done she will be worth every penny. Seriously, its like building a brand new car from the factory... i dont think there will be anything stock left over!!
laterZ!
Well, got some more stuff in. Man, do i love getting new stuff!! The cost of this build is retarded!! IFs funny how a bunch of 299.99's and 179.99's, which look ok, adds up to thousands when you add them all up on a receipt!!
Anyways, got my injectors, 160lbs. HAD to finally order the BS3, big dent in the wallet but it was almost inevitable. We established a few plans of attack and all were right around the same price, with what i needed, so the bs3 seemed logical and with the injectors, the bs3 was probably my only choice.
Anyways, got a flaming river battery battery kill swith, battery relocation kit, ATI harmionic balancer and my SWEET intake elbow. (Mods, it has a sticker from a non-vendor, so if you wish, let me know and i'll remove it
) The intake elbow welds are very, very nice. Its gonna look sweet after powdercoating.
anyways, what do ya'll think? Project is moving thats for sure. Expensive, but i hope when its done she will be worth every penny. Seriously, its like building a brand new car from the factory... i dont think there will be anything stock left over!!
laterZ!
