Well, IT HAS BEGUN!!!
Originally Posted by black98ws6ta
S85 was stated above.
h aha just didnt want to reread the whole thing.....
Its it in hand yet??? if not go bigger....... shouldnt be much lag at all with a 408 and a 91 or 95mm unit...
man, board didnt post my earlier post!!!
anyways, sorry kyle, but the drivetrains will consist of a 4l80e, a top-gun driveshaft form Spohn, and a Strange 12 bolt with a 3.42.
We actually just finished that discussion.
When the s91 was announced, we were gonna jump all over that. However, considering that the s85 was already been built, we decided to keep the s85 and see where this lil' s85 will take us.
If not, the s91 is built of the same mid-frame size so if the s85 falls a little short which is like saying that a million dollars can't buy ya a c6 z06 for every day of the week, then i'll just rebuilt it for a 91mm.
question, you think the s91 is a better match for a 408ci motor? I know i would like to go bigger just becuase, however, i want to see how well or soon this turbo gets into boost before moving on. I really dont want to rev her past 6500-6600 rpms.
anyways, sorry kyle, but the drivetrains will consist of a 4l80e, a top-gun driveshaft form Spohn, and a Strange 12 bolt with a 3.42.
We actually just finished that discussion.
When the s91 was announced, we were gonna jump all over that. However, considering that the s85 was already been built, we decided to keep the s85 and see where this lil' s85 will take us. If not, the s91 is built of the same mid-frame size so if the s85 falls a little short which is like saying that a million dollars can't buy ya a c6 z06 for every day of the week, then i'll just rebuilt it for a 91mm.
question, you think the s91 is a better match for a 408ci motor? I know i would like to go bigger just becuase, however, i want to see how well or soon this turbo gets into boost before moving on. I really dont want to rev her past 6500-6600 rpms.
No I was just looking at the nitto drags and they are not them they might be the nitto autocross tires which look very similar???? Your right about the rears those are drags, but I should have stated fronts is what I am asking.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo right, nitto has to competition tires, the nitto 555r 1's and the 555r 2's. The 1's are for drag while the other is for road racing/autocross.
The rears are nittos however, the fronts are Flaken RT-615's. They are also for autocross/RR and are a great tire. Stick really good, are inexpensive and look cool. fronts are 275's and those are their new pattern. Not really a true rain type of thread tire but they hold out fine in the rain.... im considering going to a more rain type of tire if these dont hold out.
SOM: Yeah, you can say that!! I want to hit gainsville and moroso as well. You in orlando right?
The rears are nittos however, the fronts are Flaken RT-615's. They are also for autocross/RR and are a great tire. Stick really good, are inexpensive and look cool. fronts are 275's and those are their new pattern. Not really a true rain type of thread tire but they hold out fine in the rain.... im considering going to a more rain type of tire if these dont hold out.
SOM: Yeah, you can say that!!
I want to hit gainsville and moroso as well. You in orlando right?
Originally Posted by obZidian
SOM: Yeah, you can say that!! I want to hit gainsville and moroso as well. You in orlando right?
I want to hit gainsville and moroso as well. You in orlando right?yes sir. I 'm thinkin bout coming down to miami to ***** my car out. wanna check out the towers in lauderdale too.
when i get my twins put on we'll have get on I-95 and run em!
you know it!! Getting rid of your vortech? hmm.. well, we live and learn right?!
Dude, around here, 1-95 is not for racing... too many turns and the pavement is jagged, cut up in places. At 80mph is fine but anything above that a little jag tunrs into a huge bump.
but no worries, im sure i know of a few places. The towers is supposively a huge car meet. You'll see all sorts of cars/trucks/ppl out there. Never been there but i have been asked to go when she's done. Let me know, we'll hang and check out the locals. Get a video or two, got a buddy with a 500rwhp+ h/c ONLY 346ci firehawk that is game for racing.
laterZ!
Dude, around here, 1-95 is not for racing... too many turns and the pavement is jagged, cut up in places. At 80mph is fine but anything above that a little jag tunrs into a huge bump.
but no worries, im sure i know of a few places. The towers is supposively a huge car meet. You'll see all sorts of cars/trucks/ppl out there. Never been there but i have been asked to go when she's done. Let me know, we'll hang and check out the locals. Get a video or two, got a buddy with a 500rwhp+ h/c ONLY 346ci firehawk that is game for racing.
laterZ!
I like my vortech, but my goal for real big power will be more doable with this kit. I dont want to lose my a/c and the kit i'm looking at is very nice in quality.
gonna do a few more things with the supercharger to see how much i can push it in the 10's then i'm gonna switch the setup in late July.
maybe this weekend or next. hopefully it gets a little warmer.
gonna do a few more things with the supercharger to see how much i can push it in the 10's then i'm gonna switch the setup in late July.
maybe this weekend or next. hopefully it gets a little warmer.
Originally Posted by obZidian
man, board didnt post my earlier post!!!
anyways, sorry kyle, but the drivetrains will consist of a 4l80e, a top-gun driveshaft form Spohn, and a Strange 12 bolt with a 3.42.
We actually just finished that discussion. When the s91 was announced, we were gonna jump all over that. However, considering that the s85 was already been built, we decided to keep the s85 and see where this lil' s85 will take us.
If not, the s91 is built of the same mid-frame size so if the s85 falls a little short which is like saying that a million dollars can't buy ya a c6 z06 for every day of the week, then i'll just rebuilt it for a 91mm.
question, you think the s91 is a better match for a 408ci motor? I know i would like to go bigger just becuase, however, i want to see how well or soon this turbo gets into boost before moving on. I really dont want to rev her past 6500-6600 rpms.
anyways, sorry kyle, but the drivetrains will consist of a 4l80e, a top-gun driveshaft form Spohn, and a Strange 12 bolt with a 3.42.
We actually just finished that discussion.
When the s91 was announced, we were gonna jump all over that. However, considering that the s85 was already been built, we decided to keep the s85 and see where this lil' s85 will take us. If not, the s91 is built of the same mid-frame size so if the s85 falls a little short which is like saying that a million dollars can't buy ya a c6 z06 for every day of the week, then i'll just rebuilt it for a 91mm.
question, you think the s91 is a better match for a 408ci motor? I know i would like to go bigger just becuase, however, i want to see how well or soon this turbo gets into boost before moving on. I really dont want to rev her past 6500-6600 rpms.
That 408 with a 85mm turbo is going to spool awsome..... im in full boost by 37-3800 man..... and u have 38ci more them me.....
Your right about being able to go bigger later pretty easy.... so dont worry about it LOL
Its going to be fun
Kyle
Originally Posted by black98ws6ta
Just dont push the turbo hard trying to make it make power, pay attention to egts and backpressure
I agree 100% ..... man i just noticed your in Loiusville,ky..... im thru there all the time.... we should meet up one of these days. Id love to see the car.
Kyle
Originally Posted by NA$TY-TA
I agree 100% ..... man i just noticed your in Loiusville,ky..... im thru there all the time.... we should meet up one of these days. Id love to see the car.
Kyle
Kyle