Alternatives to a FMIC?
#22
TECH Fanatic
iTrader: (3)
Join Date: Feb 2005
Location: Naples, FL
Posts: 1,118
Likes: 0
Received 0 Likes
on
0 Posts
What size cores did you use? What kinda power can they handle? Most importantly, do you have any IAT data?
#23
10 Second Club
iTrader: (29)
the core was a 6.00" x 25.00" x 3.50". they say it is good for 900 hp.
Looking at one of my logs for the IAT's it looks like idling stays around 100 (with the fans running) and throughout the log it climbs to 120 for about 1 second and starts going back down to around 112. for a 1/4 pass and this was in September.
Looking at one of my logs for the IAT's it looks like idling stays around 100 (with the fans running) and throughout the log it climbs to 120 for about 1 second and starts going back down to around 112. for a 1/4 pass and this was in September.
#26
10 Second Club
iTrader: (29)
Originally Posted by smokinHawk
does your radiator run hot?
anymore pics from like underneath?
anymore pics from like underneath?
as far as underneath pics, i do not have any, YET. i need to get some taken i have had some other people ask me for them.
#27
TECH Fanatic
iTrader: (3)
Join Date: Feb 2005
Location: Naples, FL
Posts: 1,118
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by fitz98ta
the core was a 6.00" x 25.00" x 3.50". they say it is good for 900 hp.
Looking at one of my logs for the IAT's it looks like idling stays around 100 (with the fans running) and throughout the log it climbs to 120 for about 1 second and starts going back down to around 112. for a 1/4 pass and this was in September.
Looking at one of my logs for the IAT's it looks like idling stays around 100 (with the fans running) and throughout the log it climbs to 120 for about 1 second and starts going back down to around 112. for a 1/4 pass and this was in September.
Next question is, how much money did it cost to set up the cooler, no plumbing?
For me its either going to be a setup similar to this, or Im just gonna keep the Procharger twins and spray meth.
Nice setup btw...