More pictures of the new setup!!
Yeah someone put DJ's face on one of those smiley's and it will be self explanitory lol! I will have the new K-member by tommorrow and so it won't be long I decided to quit fighting it and change it so that it may cure a lot if not all of my fitment issues. I already have everything else ready to drag DJ's *** LOL!
Well I did get everything done. dropped the motor out changed the K-member and a few other things. Had to cut and reweld a few of the charge pipes and do a lot of tweaking to get it to fit like it does which is very good considering he fabbed it off of his car and they are all just a little different etc... I tried to crank but she didn't start so I have to do a little trouble shooting today after work as I worked hard and steady all weekend to get her 90% complete so I am not too worried right now as it could be several things I just tried a few times and said goodnight as it was 12:30 and I had to get up this morrning at 3:45 for work. I will get some more pictures for you guys as it looks pretty good if I do say so myself.
Jeff
Jeff
Originally Posted by Inspector12
Well I did get everything done. dropped the motor out changed the K-member and a few other things. Had to cut and reweld a few of the charge pipes and do a lot of tweaking to get it to fit like it does which is very good considering he fabbed it off of his car and they are all just a little different etc... I tried to crank but she didn't start so I have to do a little trouble shooting today after work as I worked hard and steady all weekend to get her 90% complete so I am not too worried right now as it could be several things I just tried a few times and said goodnight as it was 12:30 and I had to get up this morrning at 3:45 for work. I will get some more pictures for you guys as it looks pretty good if I do say so myself.
Jeff
Jeff
Goodluck bro.
Originally Posted by JMBLOWNWS6
Dammit cockblocked! Hey to let you know if you bought a Katech harness for the LS2 then wires have been crossed on the crank pickup on them. Out of 4 I have done 3 of them were wrong and caused all three cars not to start. Just a FYI if you used that. Goodluck bro.
Goodluck bro.Jeff
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Originally Posted by Inspector12
No harness I swapped the outer two wires around and plugged it in. The only other plug I messed with was the crank sensor and that was to tap in the factory harness for the tach signal the rest is the BS3's harness with no spices. So I am going to make some phone calls and see what I need to check etc... Thanks for the help bro.
Jeff
Jeff
Jeff I have some hook ups with BS3. Let me know if you need any help bro!
Originally Posted by JMBLOWNWS6
Jeff I have some hook ups with BS3. Let me know if you need any help bro!
Jeff
I really want to hear this car! Still have no crank signal tried a different crank sensor although the one I had was new stillnothing check the conections and the wires are making connection from computer to the plug. I am getting a little frustrated. Any ideas?
Jeff
Jeff
Originally Posted by Inspector12
Still have no crank signal tried a different crank sensor although the one I had was new stillnothing check the conections and the wires are making connection from computer to the plug. I am getting a little frustrated. Any ideas?
Jeff
Jeff
Originally Posted by Inspector12
Still have no crank signal tried a different crank sensor although the one I had was new stillnothing check the conections and the wires are making connection from computer to the plug. I am getting a little frustrated. Any ideas?
Jeff
Jeff
Good luck Jeff, I know if anyone can get it figured out it is you!!
It's alive finally found my problem and its running I am going to be finishing up a few things tonight and should be ready for some tunning action very soon. I will try to get a friend to post a video of it starting up for you guy to check it out.
Jeff
Jeff
Lies! 