power from stock cubes
That's the way i'm going - keeping my 5.3 heads (since there a good amount of port&polish work) and going with a -16cc dish Mahle (3.908 bore) forged piston to bring the CR down to 9.0:1 (w/ .060 head gasket)... stock crank, eagle forged rods, and Twin T44's... project will be done by the time the snow melts...
I'm expecting 650-700 whp... street only monster
Trending Topics
The Best V8 Stories One Small Block at Time
even on a 346








cough*1000hp*cough

