Will this pcv system work?? PICS!!
Will this pcv system work?? PICS!! I have all the vents going to the catch can with the pcv before it, than line from catch can into intake, with check valve.
The catch can looks very close to the header but its about 3" from it
The catch can looks very close to the header but its about 3" from it
8 sec potential, 12 sec slip
iTrader: (50)
Joined: Apr 2002
Posts: 4,092
Likes: 2
From: Savannah, GA
You should put the PCV valve directly attached to the intake manifold. The way you have it now, you will be boosting the catch can...
Also, you will not have any ventilation under boost either (when you need it most). Take that T out of the line, and run a hose coming from the front port on the p/s valve cover to the intake side of your turbo. Then you should be good.
Also, you will not have any ventilation under boost either (when you need it most). Take that T out of the line, and run a hose coming from the front port on the p/s valve cover to the intake side of your turbo. Then you should be good.
8 sec potential, 12 sec slip
iTrader: (50)
Joined: Apr 2002
Posts: 4,092
Likes: 2
From: Savannah, GA
You can buy new vacuum line for like $1 a foot... Thats the only way to be venting the crankcase while in boost unless you vent to the atmosphere, then that totally defeats the whole PCV system...
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
