finished 4" intercooler piping on this obx style
Thread Starter
TECH Senior Member
iTrader: (48)
Joined: Jan 2002
Posts: 7,354
Likes: 1
From: Columbus, ohio
finished 4" intercooler piping on this obx style finished up welding the 4" pipe to the intercooler to throttle body, seemed to turn out ok
here are some pics
also included some pics of the 4" exhaust
here are some pics
also included some pics of the 4" exhaust
Trending Topics
Thread Starter
TECH Senior Member
iTrader: (48)
Joined: Jan 2002
Posts: 7,354
Likes: 1
From: Columbus, ohio
yes the return is on the driver side, and pick up on the left, its a griffin 19x22
the 4" intake piping is the same size as my 4" exhaust, 4" piping looks so pimp.
hopefully she will do a whole lot better then high 11's as next time she goes out she'll have some meaty stickies and a 3 speed with a brake.
the 4" intake piping is the same size as my 4" exhaust, 4" piping looks so pimp.
hopefully she will do a whole lot better then high 11's as next time she goes out she'll have some meaty stickies and a 3 speed with a brake.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
nice job! 
Originally Posted by smokinHawk
finished up welding the 4" pipe to the intercooler to throttle body, seemed to turn out ok
here are some pics
also included some pics of the 4" exhaust
here are some pics
also included some pics of the 4" exhaust
Thread Starter
TECH Senior Member
iTrader: (48)
Joined: Jan 2002
Posts: 7,354
Likes: 1
From: Columbus, ohio
bought them used off of a guy with a 1000+RWHP single turbo viper as he had some left overs.
some of the ends are beaded, but not all as its hard to get the silicon and clamps on. i think the tbolt clamps wil hold pretty well, if not then ill bead them.
some of the ends are beaded, but not all as its hard to get the silicon and clamps on. i think the tbolt clamps wil hold pretty well, if not then ill bead them.
