Dyno'd car this sound right
Thread Starter
TECH Enthusiast
iTrader: (13)
Joined: Aug 2006
Posts: 591
Likes: 0
From: Pensacola, FL
Dyno'd car this sound right 01 WS6 sts gt67, FMIC, valve springs
Mustang dyno
390rwhp
433rwt @7.1psi
Why does a mustang dyno read so much different then dynojet. Happy with car it feels good. Just didnt understand.
Mustang dyno
390rwhp
433rwt @7.1psi
Why does a mustang dyno read so much different then dynojet. Happy with car it feels good. Just didnt understand.
for that turbo and being a rearmount on the mustang dyno thats not to bad at 7psi
the MD loads the dyno more accuratly measuring like if the car was on the street considering wind resitance and vehicle weight and junk.
the MD loads the dyno more accuratly measuring like if the car was on the street considering wind resitance and vehicle weight and junk.
@ 7psi....... wow ive seen sts cars @ 5 psi put down 410+whp with no intercooler locally on a dyno dynamics dyno.
Last edited by smokinHawk; Jun 5, 2007 at 11:57 AM. Reason: mod error, post is unchanged
Originally Posted by vipvegas
01 WS6 sts gt67, FMIC, valve springs
Mustang dyno
390rwhp
433rwt @7.1psi
Why does a mustang dyno read so much different then dynojet. Happy with car it feels good. Just didnt understand.
Mustang dyno
390rwhp
433rwt @7.1psi
Why does a mustang dyno read so much different then dynojet. Happy with car it feels good. Just didnt understand.
A 390 RWHP car is not going to pull a new 600cc CBR from a roll the way we did with everything working against us, passanger, windows down, no bumper cover on the car, pulled timing and him getting a run on us.
Last edited by Zombie; Jun 5, 2007 at 11:19 AM.
Originally Posted by 02Vortech
@ 7psi....... wow ive seen sts cars @ 5 psi put down 410+whp with no intercooler locally on a dyno dynamics dyno.
MD are tough.
best way to tell what your car is running is take it to the track and check the MPH
Hmmmm. What kind of timing are you running in boost? They do seem low IMO, but like he said...dyno numbers don't mean everything.
At 6psi through the FMIC, I'm at 465ish and 475tq running 18 degrees of timing on the dynojet.
1/8 mile track with a ridiculously awesome 60' time of 2.3xx seconds, I pulled 89 mph. I have done a couple things since...I'd be curious to go back out and see what it does now. M6 w/ street radials + turbo = non-drag strip car
.
At 6psi through the FMIC, I'm at 465ish and 475tq running 18 degrees of timing on the dynojet.
1/8 mile track with a ridiculously awesome 60' time of 2.3xx seconds, I pulled 89 mph. I have done a couple things since...I'd be curious to go back out and see what it does now. M6 w/ street radials + turbo = non-drag strip car
. Trending Topics
Ya those numbers seem good cause i have seen up to a 50rwhp loss from a mustang to a dyno jet!!! so i would just go to the track and have fun with it. sounds like you a fun street car!! good luck with it
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Thread Starter
TECH Enthusiast
iTrader: (13)
Joined: Aug 2006
Posts: 591
Likes: 0
From: Pensacola, FL
Jeremy,
Like I said above Im thoroughly impressed with vehicle. Your right look at your car numbers mean nothing. Just wanted to compare and contrast what others have found. Car is running great thanks to your tune. I am very happy with your work. And yes we demolished the 600rr like nothing. ONce again Thank to ZombieSS for the tune and the vehicles first kill..
Like I said above Im thoroughly impressed with vehicle. Your right look at your car numbers mean nothing. Just wanted to compare and contrast what others have found. Car is running great thanks to your tune. I am very happy with your work. And yes we demolished the 600rr like nothing. ONce again Thank to ZombieSS for the tune and the vehicles first kill..
Originally Posted by pdanrichey
Hmmmm. What kind of timing are you running in boost? They do seem low IMO, but like he said...dyno numbers don't mean everything.
10.1:1 compression, 91 octane and 100+ daily temps just do not get along.
Every thing in vegas is slow and makes less power.
With the weather we have right now a stock LS1 will not even trap 100mph. My stock SRT 4 traps 92 mph... weather sucks.
Thread Starter
TECH Enthusiast
iTrader: (13)
Joined: Aug 2006
Posts: 591
Likes: 0
From: Pensacola, FL
weather out here effects big time. Dont get me wrong the car is fast, but you can lose almost a full second in the 1/4 between east and west coast. Vegas sucks, it was 11:30 at night when we were tuning and the temp outside was 94. Makes a difference with the 100 octane, I love it.
Originally Posted by Zombie
A 390 RWHP car is not going to pull a new 600cc CBR from a roll the way we did with everything working against us, passanger, windows down, no bumper cover on the car, pulled timing and him getting a run on us.
i would look at it in 2 ways, yes the number seems low, but track times tell all, look at Zombie
my car with fmic, fuel, GT67 and 7.5psi made 472/501, but it wouldn't do **** at the track if i wanted it too, i street race
goodluck
my car with fmic, fuel, GT67 and 7.5psi made 472/501, but it wouldn't do **** at the track if i wanted it too, i street race
goodluck
Thread Starter
TECH Enthusiast
iTrader: (13)
Joined: Aug 2006
Posts: 591
Likes: 0
From: Pensacola, FL
2002/Black/SS I have no reason to lie. This is a comparisson and Im getting feedback. The tuner was driving and myself the owner was in the passenger seat as we destroyed this bike. No lies here. I wouldnt give false data for my own comparison.
Originally Posted by vipvegas
2002/Black/SS I have no reason to lie. This is a comparisson and Im getting feedback. The tuner was driving and myself the owner was in the passenger seat as we destroyed this bike. No lies here. I wouldnt give false data for my own comparison.
Originally Posted by 2002/Black/SS
there is no way that u pulled a 600cc cbr, i ran mid ten all day with mine, and im 100% sure ur 7psi car ddint do that, my 9psi ss can barly do it
Originally Posted by 2002/Black/SS
well maybe the bike wasnt racing
LMAO, dude, you have no idea how slow a 600cc bike is here in vegas. It's rare that I see one trap over 120mph at the track. Yes, he was racing, yes he dropped gears (I even gave him the jump), and yes we pulled him good, he hung upto about 90 mph then it was all over. Bike guys always have such huge egos, even the 600cc guys, it's fun to crush them. 90% of the 600's are high 11 sec bikes, low 11's with a good rider. Welcome to summer in Vegas, the black hole vortex that sucks up your HP.
I have only ever seen 1 600 cc bike here in vegas break into the 10's (10.8 @ 124) and it was in cooler weather with an extremely good rider, the bike was also modded extensively (geared, strapped, lowered, full race pipe, tuned, etc). A 155 RWHP 03 GSXR 1000 was trapping 133-134 mph a few weeks ago.
I guess you wouldn't believe that I have at least 10 liter bike kills (GSXRs, CBRs, R1s) to my name. That's when I'm running 15psi and 91 octane, not my race tune and 18psi.
If you guys really want to pick on his 7psi dyno number, his uncorrected was something like 365 RWHP LOL
Last edited by Zombie; Jun 5, 2007 at 04:17 PM.
this is alittle different and off topic, but my Blown 94 z28 A4 with no FMIC,stock heads ported, stock cam,stock crank and boltons put down 400rwhp 387rwtq on a mustang dyno and this was with the new fuel pump(walbro grr ) going bad at 5500rpm it would cut out and also my plugs were junk from being washed out. motor was solid till the dyno shop had it and motor blew up shortly after. thought i would share my numbers and i was running 7psi.