Silicone Coupler for A2W intercooler help...
Thread Starter
TECH Resident
iTrader: (7)
Joined: Jul 2003
Posts: 802
Likes: 2
From: Memphis, TN---San Diego, CA
Silicone Coupler for A2W intercooler help... I finally got my Air To Water Intercooler in the mail today and now I'm trying to track down the pieces to get it installed in the car. The one I need right now is a silicone coupler that will go from an oval to a circle. The intercooler has the weird oval opening and trying to find couplers for the oval openings through the normal channels isn't working for me. The oval size is 3 1/4 OD tall, 5 1/8 OD wide, and 14 1/8 OD circumference all the way around. I've included some pics so you guys could kinda see what I'm talking about. The intercooler is just sitting on my incon butt pipe right now and the cars dirty so don't be too hard on me. 
Almost forgot, I need it to step down to 3.5 inch after the oval. Thanks. (If it's a non-sponsor or something like that, just PM me the name, thanks)
Almost forgot, I need it to step down to 3.5 inch after the oval. Thanks. (If it's a non-sponsor or something like that, just PM me the name, thanks) Last edited by anarchy99; Jun 30, 2007 at 06:42 PM.
Thread Starter
TECH Resident
iTrader: (7)
Joined: Jul 2003
Posts: 802
Likes: 2
From: Memphis, TN---San Diego, CA
nevermind, I think I got it figured out... I just took my 4 inch silicone piece that is in-between the 90mm TB and charge pipe and it squeezed on there so I guess I can just use a 4 inch to 3.5 inch reducer.
