project last head gaskets evarr!
Thread Starter
Joined: Nov 2001
Posts: 10,018
Likes: 51
From: Virginia
project last head gaskets evarr! this way when the heads and block blow apart around it, i can swap em over to the new stuff this winter
http://www.richmondperformancemuscle.../original.aspx
anybody else got em? on a motor? running? performing well?
im gonna make you squint for the part number
hope i will get the car apart maybe next weekend and get the heads surfaced / put these on and ready for the following weekend.
http://www.richmondperformancemuscle.../original.aspx
anybody else got em? on a motor? running? performing well?
im gonna make you squint for the part number
hope i will get the car apart maybe next weekend and get the heads surfaced / put these on and ready for the following weekend.
Who's gaskets? Cometic? I see they are for the new added head bolts also. Looks good I can read the part number just fine 26473L LOL! Little info on them would be nice other than they are for the new heads.
Originally Posted by MIGHTYMOUSE
this way when the heads and block blow apart around it, i can swap em over to the new stuff this winter
http://www.richmondperformancemuscle.../original.aspx
anybody else got em? on a motor? running? performing well?
im gonna make you squint for the part number
hope i will get the car apart maybe next weekend and get the heads surfaced / put these on and ready for the following weekend.
http://www.richmondperformancemuscle.../original.aspx
anybody else got em? on a motor? running? performing well?
im gonna make you squint for the part number
hope i will get the car apart maybe next weekend and get the heads surfaced / put these on and ready for the following weekend.
Phil
Thread Starter
Joined: Nov 2001
Posts: 10,018
Likes: 51
From: Virginia
greg (fel pro) says they should be better than their 4 bolt gaskets for head lifting situations. i dont really have any other info. they got more layers i can tell.
Trending Topics
It has a extra layer welded in that helps with head deflection. That gasket should hold better than anything else out there, but we all know you will keep adding boost until it pops........lol
Kurt
Kurt
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Originally Posted by Phil99vette
My set should be here any day now. Our setup is ***-backwards from everyone elses.
Phil
Phil
Thread Starter
Joined: Nov 2001
Posts: 10,018
Likes: 51
From: Virginia
Originally Posted by sr71bbjr
Does noone believe in o ring ,reciever groove,and copper head gaskets anymore??
Kurt?
Kurt?
this motor has been together since nov 05; and because that is a personal record for me I dont want to take it out of the car until it REALLY needs to come out
like kurt said.What happens to the gasket if you take it out of the bag early? Does it go stale? They are in a zip loc bag... maybe i should put them in the refrigerator now?
I still use copper alot on high hp stuff, but I have high hopes for the new Fel Pro part that David has. I can't wait to see what happens with 6 bolt/Fel Pro and high power.
Kurt
Kurt
Originally Posted by MIGHTYMOUSE
some people have to get to work on monday; and that just might be a tad more than i can get done in a weekend.
this motor has been together since nov 05; and because that is a personal record for me I dont want to take it out of the car until it REALLY needs to come out like kurt said.
What happens to the gasket if you take it out of the bag early? Does it go stale? They are in a zip loc bag... maybe i should put them in the refrigerator now?
this motor has been together since nov 05; and because that is a personal record for me I dont want to take it out of the car until it REALLY needs to come out
like kurt said.What happens to the gasket if you take it out of the bag early? Does it go stale? They are in a zip loc bag... maybe i should put them in the refrigerator now?
Time to get a Beater David...... some for the Just in case situation LOL
Found me a Camary that i dont care one bit about..... goes 3 weeks on a tank of gas.... not 3 days LOL
Originally Posted by NA$TY-TA
Time to get a Beater David...... some for the Just in case situation LOL
Found me a Camary that i dont care one bit about..... goes 3 weeks on a tank of gas.... not 3 days LOL
Found me a Camary that i dont care one bit about..... goes 3 weeks on a tank of gas.... not 3 days LOL
Originally Posted by 69vette
I thought he already had a turbo cylone...still not a beater car though? I guess its just a personal choice not to go with o rings for David.
Is your motor O-Ringed??
