Finally made some 2007 hits, 9.44@144 and 1.35 on DR's
09-27-2007 | 12:12 PM
#81
Originally Posted by 69vette
I almost always use barb fittings and put one zip tie on the hose. I've never had an issue with them coming off. I've ran 35+ psi on some of the imports we've built and no lines ever came off.
Mine had those also but we were blowing some off...... that way does work..... we just had a couple problems so we decided it was worth the Lil bit of $$ for these.
Kyle
09-27-2007 | 12:16 PM
#82
Thread Starter
Joined: Nov 2001
Posts: 44,830
Likes: 1,251
From: Chicago, IL
I melted the BOV plastic line from ambient heat from the turbo.
Okay, can I run the parts y'all are suggesting with my current distribution fitting, or do I need a new one? It's here in this pic:
Okay, can I run the parts y'all are suggesting with my current distribution fitting, or do I need a new one? It's here in this pic: