Finally got to work on my car.
Thread Starter
9 Second Club
iTrader: (17)
Joined: Nov 2002
Posts: 4,997
Likes: 0
From: New Braunfels ,Tx
Finally got to work on my car. Well I finally got my engine 
This is about 3 days worth of work. I wasnt able to get the hot parts back in time so here are the pics of what I have done so far. Trying to make it to memphis but it is going to be close. 
LS2 402 stroker 9:0:1 with trick flow 235's 
Motor and transmission is installed and I allready did the intercooler. So Im not too far away from startup.
This is about 3 days worth of work. I wasnt able to get the hot parts back in time so here are the pics of what I have done so far. Trying to make it to memphis but it is going to be close. LS2 402 stroker 9:0:1 with trick flow 235's Motor and transmission is installed and I allready did the intercooler. So Im not too far away from startup. Thread Starter
9 Second Club
iTrader: (17)
Joined: Nov 2002
Posts: 4,997
Likes: 0
From: New Braunfels ,Tx
Yup. I just had to come back to work for the next 4 days 
I have busted *** to get it in the car but have a little ways to go. I didnt sleep more than 16 hrs in the last 4 days 
I would have alot more done but my whole turbo kit went to the coaters and I have the the deminsions of the intake ducting to the turbo's be mocked. Ill replace the rubber with aluminium ducts.
I have busted *** to get it in the car but have a little ways to go. I didnt sleep more than 16 hrs in the last 4 days I would have alot more done but my whole turbo kit went to the coaters and I have the the deminsions of the intake ducting to the turbo's be mocked. Ill replace the rubber with aluminium ducts. Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Thread Starter
9 Second Club
iTrader: (17)
Joined: Nov 2002
Posts: 4,997
Likes: 0
From: New Braunfels ,Tx
LME got the cover from the chevy dealer and I prepped and painted them. I dont have enuff time to send them to powder coating 
Memphis is coming and I want to make it! LOL I saved ALOT of money and it helps that I have paid off alot of things.
Memphis is coming and I want to make it! LOL I saved ALOT of money and it helps that I have paid off alot of things. 
good luck with that. the rubber ducts are a damn tight fit, I don't know if you'll even be able to get aluminum ducts of the same dimensions in there.
Thread Starter
9 Second Club
iTrader: (17)
Joined: Nov 2002
Posts: 4,997
Likes: 0
From: New Braunfels ,Tx
Last time out was 9.78@151 
Thread Starter
9 Second Club
iTrader: (17)
Joined: Nov 2002
Posts: 4,997
Likes: 0
From: New Braunfels ,Tx
Thread Starter
9 Second Club
iTrader: (17)
Joined: Nov 2002
Posts: 4,997
Likes: 0
From: New Braunfels ,Tx
So as of right now I was just informed the manifolds,turbo's,feed lines,wastergates and intercooler are done. So it looks like I will make it 