Who's Running SMC and What Jet Do You Have?
#1
TECH Resident
Thread Starter
Join Date: Jan 2002
Location: Phoenix, AZ
Posts: 956
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Just wondering . . . I have a #7 in mine, going to tune it soon. What jets are you running, and what pump speed, what boost, etc.
Thanks!
- Dug
Thanks!
- Dug
#2
TECH Fanatic
iTrader: (2)
Join Date: Jan 2003
Location: jacksonville,FL
Posts: 1,143
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I have the dual nozzle trunk mount smc kit. I have the pump set on 5 and the turn one point at 6-7psi with the #6 jets. Im about to drop in an already forged bottomed end motor with low compression. So I havent really tested it full potensial yet but I will with in the next three weeks when we put the motor back in. Alot of the Turbo Buicks run 100% denatured alky at first and tune from there. What kidn of compression are you running?
![Driving](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_driving3.gif)
#4
TECH Resident
Thread Starter
Join Date: Jan 2002
Location: Phoenix, AZ
Posts: 956
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I'm running a bone-stock block, hence stock CR. It's killing me here in AZ with 110F and 91 octane!!
I'm just hoping the #7 will be good enough. I can't get in touch with SMC anymore, emails are bouncing and he's not answering emails!
- Dug
I'm just hoping the #7 will be good enough. I can't get in touch with SMC anymore, emails are bouncing and he's not answering emails!
- Dug