i know this shoulg go in the fueling section , but i'm sure i read this here before , and a search netted nothing. so mods can you keep this here for a few days?
what is the procedure to replace the stock wiring to the intank walbro with bigger guage wire? what guage wire should i use? where to use it? etc.

thanks

 

i used a 10-12 gauge wire (with high-temp jacket/oil resistant). Ran that from the aux terminal to a relay. THe relay gets turned on by the old power wire to the fuel pump. I had a 14gauge wire from the relay to the conector (new power wire) to the fuel pump.

 

thanks smokin,
did you have the wiring end at the module connector ( top of the sending module ) or did you take it all the way into the tank and to the pump?

 

first pump, it ended at the conector.
the second pump the wire goes to the pump.