I had the large 90deg coupler on the TRT intercooler setup split on me. The one that directs the charge straight up. What size is that? Does anyone know?

 

I think its 3"-3.5" can anyone confirm this? I don't feel like pulling the connector off the car right now to be sure.

 

Is it the one that connects to the maf?

 

Or the Tbody on top.

 

It used to connect to the maf i believe. (SD now)

 

Dam I have a 3 to 4 inch abs rubber 90' No help here. How did you make the bend with out the maf can u post a pic.

 

its 3" to 3.5", the one that connects to the maf and is black.

 

Ok question. Did you just use a differnt pice of pipe or the stock pipe that is flanged for the maf. If its the flanged pipe its 3 to 4 inch. I just mesured it. If your using the stock pipe with the flanged end for the maf I have a 90deg coupler 4 u.

 

i kinda modified the whole setup... i have the 90* black bend going from the 3" BOV pipe to the 3.5" MAF, and after i modified the rest to fit. i know the one that connects to the TB is 3 to 4. here is the best pic i got...... soon i am going to be changing the whole setup to go over the radiator, as i dont like the location of the MAF

 

OHHH ok Naw this one is tooo big LOL! Hey where is your vac line for your BOV?

 

i took the pic before i attached a vacuum line... thanks for lookin out tho!!

 

interesting

 

so what size elbow do you need again? I might have the size you are looking for, PM me with the specs on it if you want a replacement
thanks

 

I've already got one on order, thanks for the offer though. Its 3"-3.5" 90.

 

Pimp! I miss that cam tho I have the chop chop now