1000rwhp Warhawk + TTix build
The fuel system was done by my turbo installer. I dont know what the regulator is set too, but it idles around 48 to 50psi and is set to a one to one ratio and at WOT it sits at 70psi and does not move. Thats off the wastegate spring. I have not watched it during a high boost run though. Next time I get the chance I will try and drive and watch the fuel pressure and see if it goes higher than 70psi...
TECH Fanatic
Joined: Jul 2006
Posts: 1,179
Likes: 0
From: North Bay, Ontario
ayousef, i remember seeing that thread over on CF. Your cars going to be sicckk man! good to have you hear on LS1tech!!!!!!! Sooo much more activity and just a more lively forum!!! Keep us posted!
Staging Lane
Joined: Oct 2003
Posts: 81
Likes: 0
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
10 Second Club
Joined: Jun 2004
Posts: 384
Likes: 0
mashallah tabarak allah my frind , good luck on your project hoping to see it soon personaly i will be in dubai on this sunday if you dont mined i would like to meet you and see your car and maby eat your brain with some Q&A
all the best and good luck once more from sultan in Jeddah KSA
all the best and good luck once more from sultan in Jeddah KSA
FormerVendor
Joined: Dec 2001
Posts: 2,444
Likes: 2
From: WWW.SPEEDINC.COM
Thread Starter
TECH Resident
Joined: Aug 2008
Posts: 910
Likes: 0
From: Dubai
holy crap, I thought this thread dissapeared, well Vince let me make a long story short, two problems:
- a vendor screwed me up and never sent me my parts, im going to order the last few parts today/ or Monday max.
- Guy who was going to install my parts at the deaership got fired just a week ago, just a day before my engine arrived, can you imagine?
Anyhow, some pics, this thing will be alive soon ^_^
Engine built by SpeedINC, thx Fraser
- a vendor screwed me up and never sent me my parts, im going to order the last few parts today/ or Monday max.
- Guy who was going to install my parts at the deaership got fired just a week ago, just a day before my engine arrived, can you imagine?
Anyhow, some pics, this thing will be alive soon ^_^
Engine built by SpeedINC, thx Fraser
