Wrong Pulley????
Thread Starter
Joined: Aug 2002
Posts: 10,331
Likes: 1
From: San Antonio, TX
Wrong Pulley???? ATI sent my kit with a 4 inch pulley. I am only seeing 4lbs of boost on the dyno. Its the D1-SC. I do have LT's, a cam, and LS6 intake but thats about it. No head work. It only did 377.8 rwhp and 416.7rwtq. Air to fuel was great across the board. I did a search before i made this post and decided to call ATI and talk to one of there Tech's and i ordered the 3.2" pulley. How much boost do you think i will be seeing?? I shift at 6300 and its an A4.
TIA.
Kyle
TIA.
Kyle
Thread Starter
Joined: Aug 2002
Posts: 10,331
Likes: 1
From: San Antonio, TX
Re: Wrong Pulley???? Yeah I ordered the tuner kit. I had Jason at MTI do the tuning and when she put down those numbers we were both like..... what the hell is wrong with this thing. We then looked at the pulley and he said that it was huge. I measured it and it was like 4 1/16 wide so i ordered the 3.2" Those damn pulleys arent cheap. $80 bucks + $12 bucks shipping. Now i need a shorter belt. Any recommendations on what belt? They told me to get a 36 1/2" belt. By who though??? How much boost will i be seeing now?? Thanks
Thread Starter
Joined: Aug 2002
Posts: 10,331
Likes: 1
From: San Antonio, TX
Re: Wrong Pulley???? Black LS1 T/A... Thanks for your input. ATI told me to use a 36.5" belt. Would the shorter belt work?? I hope i do double my boost. Thanks.
TECH Enthusiast
Joined: Dec 2001
Posts: 548
Likes: 0
From: Dublin, CA
Re: Wrong Pulley???? FWIW - Look at the side of your pulley. It should be stamped with the size, which is the diameter of the belt surface, not including the flange. The stamp on your original pulley probably says 3.85".
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Thread Starter
Joined: Aug 2002
Posts: 10,331
Likes: 1
From: San Antonio, TX
Re: Wrong Pulley???? Thanks Black LS1 T/A.
Yes Vince i know.... where else would i look around here. I will use that part number and ask for a 36" belt. A 36.5" belt would be to long??? why would ATI say that length??
Black LS1 T/A were you seeing no slip with the 36" belt over the 36.5" belt or did you ever use that length?? Thanks again for your help.
Yes Vince i know.... where else would i look around here. I will use that part number and ask for a 36" belt. A 36.5" belt would be to long??? why would ATI say that length??
Black LS1 T/A were you seeing no slip with the 36" belt over the 36.5" belt or did you ever use that length?? Thanks again for your help.