Forced Induction Superchargers | Turbochargers | Intercoolers

is garret 60mm to small?

Thread Tools
 
Search this Thread
 
Old 09-21-2008, 10:24 PM
  #1  
Launching!
Thread Starter
 
_916ls1z28_'s Avatar
 
Join Date: Dec 2007
Posts: 221
Likes: 0
Received 0 Likes on 0 Posts
Default is garret 60mm to small?

i have a 98 ls1 camaro im installing the stage one turbo kit from hp performance. it says the kit is rated at 600 rwhp but the shop im getting it installed at said ill be making 500 to 550 rwhp is this right or will i be making less numbers ?? also im runing it to a t56 with a twin dick mcleod and a moser rear end .my ls1 is bone stock , i been doing research and i heard i have to get valve springs, push rods, dual timing chain, high flow cats and run at least 91 octane .thanks ....
Old 09-22-2008, 12:57 AM
  #2  
TECH Fanatic
iTrader: (3)
 
pozesd99''s Avatar
 
Join Date: Dec 2007
Posts: 1,541
Likes: 0
Received 0 Likes on 0 Posts

Default

at least 91 octane?? you need that in stock ls1's....
and 60mm is tad too small, leaves no room for improvement. i'd get a 67mm to 76mm turbo
Old 09-22-2008, 01:04 AM
  #3  
Staging Lane
 
bca21's Avatar
 
Join Date: Dec 2007
Location: Dirty south/houston, tx
Posts: 59
Likes: 0
Received 0 Likes on 0 Posts

Default

Twin 60s are too small.... I have a t70 60 mm on my 04 mustang gt. Thats 281 ci. that kit should be good for your stock bottem end but if you want 575-600 you might need a bigger turbo.. You be spinning a small turbo with alot of cubes.. But it will be good on the street.
Old 09-22-2008, 01:18 AM
  #4  
On The Tree
 
WSsixed's Avatar
 
Join Date: Jul 2008
Location: Arvada Colorado
Posts: 120
Likes: 0
Received 0 Likes on 0 Posts
Default

I would go with the bigger turbo. I ordered the same kit and after talking to all these guys i upgraded to a 76 mm. Did you get your kit yet? If so do you think you could take pics? Also how long did you wait on the kit? Im on month 3 now and hoping it will be done soon.

Sorry for the questions lol.

Last edited by WSsixed; 09-22-2008 at 01:20 AM. Reason: forgot stuff
Old 09-22-2008, 11:10 PM
  #5  
Launching!
Thread Starter
 
_916ls1z28_'s Avatar
 
Join Date: Dec 2007
Posts: 221
Likes: 0
Received 0 Likes on 0 Posts
Default

[QUOTE=pozesd99';10151253]at least 91 octane?? you need that in stock ls1's....
and 60mm is tad too small, leaves no room for improvement. i'd get a 67mm to 76mm turbo[/QUO 76mm should be fine for the street ?
Old 09-22-2008, 11:51 PM
  #6  
Launching!
Thread Starter
 
_916ls1z28_'s Avatar
 
Join Date: Dec 2007
Posts: 221
Likes: 0
Received 0 Likes on 0 Posts
Default

[QUOTE=WSsixed;10151291]I would go with the bigger turbo. I ordered the same kit and after talking to all these guys i upgraded to a 76 mm. Did you get your kit yet? If so do you think you could take pics? Also how long did you wait on the kit? Im on month 3 now and hoping it will be done soon.

Sorry for the questions lol.[/QUO: yea i still waiting im on the 6th month . Im waiting on the kmember fuel parts exhaust housing battery reloacator . Yea i got pics ill try to upload some. i wish i would of went with the 76 mm i thught it would blow the stock block lol
Old 09-23-2008, 04:16 PM
  #7  
On The Tree
 
WSsixed's Avatar
 
Join Date: Jul 2008
Location: Arvada Colorado
Posts: 120
Likes: 0
Received 0 Likes on 0 Posts
Default

[QUOTE=_916ls1z28_;10157666]
Originally Posted by WSsixed
I would go with the bigger turbo. I ordered the same kit and after talking to all these guys i upgraded to a 76 mm. Did you get your kit yet? If so do you think you could take pics? Also how long did you wait on the kit? Im on month 3 now and hoping it will be done soon.

Sorry for the questions lol.[/QUO: yea i still waiting im on the 6th month . Im waiting on the kmember fuel parts exhaust housing battery reloacator . Yea i got pics ill try to upload some. i wish i would of went with the 76 mm i thught it would blow the stock block lol
Well i guess im gonna have a little longer to wait. How long did it take for the first oarts to show up? Yeah uploaded pics would be sweet lol. That what i was thinking at first too, and then i talked to a bunch of people on here and they said i wouldnt be happy with the 60mm. You could always sell it and go with a different turbo.
Old 09-23-2008, 08:04 PM
  #8  
Launching!
Thread Starter
 
_916ls1z28_'s Avatar
 
Join Date: Dec 2007
Posts: 221
Likes: 0
Received 0 Likes on 0 Posts
Default

][QUOTE=WSsixed;10161619]
Originally Posted by _916ls1z28_
Well i guess im gonna have a little longer to wait. How long did it take for the first oarts to show up? Yeah uploaded pics would be sweet lol. That what i was thinking at first too, and then i talked to a bunch of people on here and they said i wouldnt be happy with the 60mm. You could always sell it and go with a different turbo.
the first box came in like 3 months
Old 09-23-2008, 08:53 PM
  #9  
On The Tree
 
WSsixed's Avatar
 
Join Date: Jul 2008
Location: Arvada Colorado
Posts: 120
Likes: 0
Received 0 Likes on 0 Posts
Default

[QUOTE=_916ls1z28_;10163057]]
Originally Posted by WSsixed

the first box came in like 3 months
Damn that will be worth the wait!!!!! Haha those parts look good!




All times are GMT -5. The time now is 05:44 AM.