tial 60mm gate issues
#43
i had an Innovative 51mm Indy gate before. with a 10psi spring. held 10psi perfect. the diaphram ripped right after ITS went out of buisness so i bought a tial v60. mounted it in the same place as my 51mm but with 2.5" pipe. now it creeps bad. must be my location right? :-/ Feel how heavy those springs are in the 60mm tial gate. There is absolutely no way 15psi will open that gate whether your 1:1 or not. i put 30psi with a compressor to it and it didn't budge. its supposed to open at 15lbs. or Tial painted the wrong springs blue!!
I have used Tial wastegates on many other cars, but every Tial v60 i have dealt with has had spring rate issues. Maybe certain color springs are correct. Or maybe Tial corrected the issue a while ago(after the purchase of my 60mm gates). Although every other Tial gate has been fine such as the Tial 38's and 44mm gates. I still love the Tial gates. Definatly the best gate on the market. Just don't trust the spring ratings
I have used Tial wastegates on many other cars, but every Tial v60 i have dealt with has had spring rate issues. Maybe certain color springs are correct. Or maybe Tial corrected the issue a while ago(after the purchase of my 60mm gates). Although every other Tial gate has been fine such as the Tial 38's and 44mm gates. I still love the Tial gates. Definatly the best gate on the market. Just don't trust the spring ratings
Last edited by KissMySSo1; 10-06-2008 at 11:41 PM.