LSX Injector question

Reply Subscribe

Thread Tools

Search this Thread

Oct 31, 2003 | 11:10 AM

devouru

Thread Starter

Teching In

Joined: Jul 2003

Posts: 23

Likes: 0

From: CA, USA

LSX Injector question

I have LS6 injectors installed in an LS6 transplant into a '00 WS6. I can't get the damn thing to start. A slight rumble for a second, then it just cranks as if no fuel or spark. A noid on the #1 injector shows firing, and there is spark as well. Thoughts? I'm reaching for straws here.

-JS

Oct 31, 2003 | 11:37 AM

Nasty N8

FormerVendor

iTrader: (33)

Joined: Feb 2002

Posts: 5,052

Likes: 0

From: Lake in the Hills, IL

You have fuel pressure at the lines? Was the PCM reflashed? Check the plugs to see if you have fuel on them. Check all your sensor wires. Could be lots of things you have to eliminate to basics.

Nate

Oct 31, 2003 | 11:46 AM

devouru

Thread Starter

Teching In

Joined: Jul 2003

Posts: 23

Likes: 0

From: CA, USA

Quote:

Originally Posted by Nasty N8

I have not reflashed the PCM. I figured it would start first, then dial in PCM. I've triple checked sensors and ground wires. I'm gonna pull a plug or two to see if they are wet. I'm checking pressure Saturday. (Didn't see this coming when I started.(

-JS