injector swap
injector swap I'm about to swap in some 60# Motrons. I have my fuel maps ready to go to install them but have one last question. Can I use the o-rings on the base of my stock injectors for these new injectors? They came with the o-rings on the top fuel rail side but not them bottom manifold side.
The answer to my question is yes. But, if you try and take the o rings of your stock injector with a radiator hook you have to buy new ones anyway. 
The base on the stock ones is pretty wide so I had to really stretch it to get it over the base and it snapped. So I need to find a new set, hopefully I can find a dealer in the area with a set so I can finally get these thing going.
The base on the stock ones is pretty wide so I had to really stretch it to get it over the base and it snapped. So I need to find a new set, hopefully I can find a dealer in the area with a set so I can finally get these thing going. Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
10 Reasons the LS7 Is GM's Most Extreme Naturally Aspirated V8 Engine Ever
Verdad Gallardo Autozone told me that had nothing like that. I just called Napa which is right down the block (totally forgot they were there) and they have them for $2 each. I guess I just need one since I only snapped one now that I know that piece comes off. Any one know how to take it off?
