Walbro at 40 psi, 25% LTFT's
#1
Walbro at 40 psi, 25% LTFT's
I have been trying to find out why my Long Term Fuel Trims are at 25%, I checked all around for vacuum leaks, but could not find any.
I checked my Fuel pressure today and its
at 30Psi with the key turned on, When I start the motor it goes to 40psi and stays there , is this too low? and could this be why my LTFT's are so high?
The pump is only about 6 months old.
I checked my Fuel pressure today and its
at 30Psi with the key turned on, When I start the motor it goes to 40psi and stays there , is this too low? and could this be why my LTFT's are so high?
The pump is only about 6 months old.