ID1000 Connector Adaptors
#1
Teching In
Thread Starter
iTrader: (1)
Join Date: Oct 2012
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
ID1000 Connector Adaptors
Just getting ready to install my new ID1000 injectors (Thanks Ed at HiTech Tuning), and noticed they have a different eletrical connector.
They came with new connectors, but I was wondering if anyone makes an adaptor(Pig Tail) to adapt these to my factory 02 LS1 injector harness, without cutting my connectors off and wiring the new ones in.
Thanks in advance...
Andy
They came with new connectors, but I was wondering if anyone makes an adaptor(Pig Tail) to adapt these to my factory 02 LS1 injector harness, without cutting my connectors off and wiring the new ones in.
Thanks in advance...
Andy
#3
Teching In
Thread Starter
iTrader: (1)
Join Date: Oct 2012
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
Connectors
Its hard to tell by looking at the picture if they are the correct ones. I will have to grab one of my injectors tomorrow and compare.
I was thinking the adaptor needs to be USCAR to Minitimer, but still not 100% sure.
I was thinking the adaptor needs to be USCAR to Minitimer, but still not 100% sure.
#4
TECH Resident
iTrader: (17)
Join Date: Sep 2004
Location: NC - Charlotte area
Posts: 3,747
Likes: 0
Received 0 Likes
on
0 Posts
the 2001/2002 factory GM plugs are EV1 style, the Bosch injectors you bought, ID1000, are USCAR/EV6 connectors. So you need an EV1 to USCAR/EV6; that is what these are. Holler if you want them.