fisherboys

Im building a stock 5.3 l33 . except for head gaskets with a holley hi ram intake and two precision 6262 turbos with a to a intercooler. being my first turbo build I was looking for direction on what is needed as far as a fuel system. I'll have to build my own tank and was thinking 100 and a 10 micron filter . boost referenced pressure guage. I was looking at two walbro 450s placed in tank something along the lines of the write up that Mighty Mouse did at top of page. Would that work? looking to make 750-800 hp on up to 18 pounds of boost if possible. I don't know what is possible with this engine and turbo setup having no experience with turbos. Just looking for direction to get it going.

fisherboys

interesting

stevieturbo

2 x 450's would do double that power, but at least you're building in plenty of capacity.

fisherboys

thanks for reply and info, can it have to much capacity?

stevieturbo

Only if it overpowers your chosen regulator at times.

But for most part not really.

fisherboys

ok thanks I appreciate the help