Is this a problem?
Thread Starter
Launching!
Joined: Jun 2002
Posts: 286
Likes: 0
From: Abilene, Tx
Is this a problem? I went to reinstall my fuel rail and when trying to place the fuel rail back on I damaged the little plastic piece on the bottom of the injector. Cracked a few of them, and a few others have a small piece missing from them.
Plus I am having problems getting all the injectors to pop back in place when installing the fuel rail. Any suggestions or easier ways of doing it that I don't know of? Any help would be greatly appreciated!!!
Plus I am having problems getting all the injectors to pop back in place when installing the fuel rail. Any suggestions or easier ways of doing it that I don't know of? Any help would be greatly appreciated!!!
TECH Addict
Joined: Mar 2004
Posts: 2,336
Likes: 0
From: Fat Chance Hotel
If you have some pics that would be helpful.
The injector spray pattern might be screwed up if you broke the tip the way I think you're saying.
I always put a *little* petroleum jelly on the o-rings to get them to seat easily.
The injector spray pattern might be screwed up if you broke the tip the way I think you're saying.
I always put a *little* petroleum jelly on the o-rings to get them to seat easily.
Thread Starter
Launching!
Joined: Jun 2002
Posts: 286
Likes: 0
From: Abilene, Tx
After using a little bit of oil and finding someone in the local area that had some extra 28# injectors I finally was able to get everything reinstalled. Although here is a pic of the piece that broke. 
TECH Addict
Joined: Mar 2004
Posts: 2,336
Likes: 0
From: Fat Chance Hotel
Originally Posted by BriGuy
After using a little bit of oil and finding someone in the local area that had some extra 28# injectors I finally was able to get everything reinstalled. Although here is a pic of the piece that broke.
