Fueling & Injection Fuel Pumps | Injectors | Rails | Regulators | Tanks

Car idles poorley after injector install! Help!

Thread Tools
 
Search this Thread
 
Old 04-07-2016, 09:39 AM
  #1  
Teching In
Thread Starter
 
johngrayo123's Avatar
 
Join Date: Mar 2016
Location: Delaware
Posts: 5
Likes: 0
Received 0 Likes on 0 Posts
Exclamation Car idles poorley after injector install! Help!

Hello, i have a 1990 Nissan 240sx with 76mm turbo 5.3 swap. the car ran and idled fine, i switched out my walbro 255 for a 400 lph fuel pump, and the stock injectors for Simens deka 60lb injectors, i started the car up and it idles very poorley, when given throttle it doesnt rev up! is this happening just because the pcm needs to be remapped for the injectors, or something else? Thanks!
Old 04-07-2016, 09:51 AM
  #2  
On The Tree
 
chaney1974's Avatar
 
Join Date: Jan 2015
Location: Amery,WI
Posts: 106
Likes: 0
Received 0 Likes on 0 Posts
Default

yes you need to have the pcm tuned
Old 04-07-2016, 10:07 AM
  #3  
Teching In
Thread Starter
 
johngrayo123's Avatar
 
Join Date: Mar 2016
Location: Delaware
Posts: 5
Likes: 0
Received 0 Likes on 0 Posts
Default

yes, i will be having it tuned, i just want to make sure that this is common, because the car will barely even idle, i would hate to get it to the tuner and have them tell me something else is wrong
Old 04-07-2016, 04:12 PM
  #4  
TECH Fanatic
iTrader: (19)
 
Majestic9C1's Avatar
 
Join Date: Jun 2013
Location: Cincinnati, OH
Posts: 1,655
Received 22 Likes on 22 Posts

Default

yes its common.. and dont start the car up anymore until you fire it up at the tuners... or put the stock injectors back in and then take it to the tuners and then swap them over and have it tuned then.
Old 04-09-2016, 01:03 PM
  #5  
9 Second Club
 
stevieturbo's Avatar
 
Join Date: Nov 2003
Location: Norn Iron
Posts: 13,616
Received 179 Likes on 154 Posts

Default

If you keep running it with the wrong injectors...something could be wrong by the time you get to the tuners.



Quick Reply: Car idles poorley after injector install! Help!



All times are GMT -5. The time now is 02:43 AM.