got_r_done

I'm putting a ProCharger on my car as we speak, and I need to ask a question about the fuel pump installation. In the instructions, I'm told to replace the "T" union with 2 female couplers and then run a braided stainless steel line to the front of the car. This line is supposed to connect to the Fuel Management Unit (FMU), but I'm not using the FMU, I'm using 42# injectors & LS1 Edit. Since I'm not using the FMU, does that mean I don't have to mess with the "T" union at all? Does this mean that all I have to do is put the fuel pump in line somewhere and wire it up? Any help at all will be greatly appreciated.

MYTURBOT/A

Just splice the pump inline and wire it up like you said. You don't have to screw with the T if your not using the FMU.