Walbro 340 Install Complete...
Thread Starter
TECH Addict
iTrader: (13)
Joined: Jan 2004
Posts: 2,900
Likes: 1
From: USN, Haze Grey and Underway
Walbro 340 Install Complete... Cutting the trap door was a piece of cake.
Make the proper electrical connections. Modify the assembly with a few holes and reinstall.
Couldn't have been any easier..
Followed some of the directions from this page Walbro Install
It's under performance and the walbro link..
Make the proper electrical connections. Modify the assembly with a few holes and reinstall.
Couldn't have been any easier..
Followed some of the directions from this page Walbro Install
It's under performance and the walbro link..
Thread Starter
TECH Addict
iTrader: (13)
Joined: Jan 2004
Posts: 2,900
Likes: 1
From: USN, Haze Grey and Underway
Originally Posted by camaro98z28
Its just as Easy on a 98 too. the person you got your info from "NIC", Knows his stuff...
Yea.. it seemed almost too easy. I felt like I was forgetting something.
After cutting out the old lines, and only having the one line for the Walbro. The case just looked empty. But it did its 2-3 second buzz on when I turned the switch, and the car ran nicely for about 5 min. so all is well.
