anyone ever used these injectors?
04-28-2005 | 07:16 PM
#1
anyone ever used these injectors? http://store.summitracing.com/defaul...=egnsearch.asp
they look to be high impedence?
thinking of using tehm in my FI setup
they look to be high impedence?
thinking of using tehm in my FI setup
04-28-2005 | 08:31 PM
#3
TECH Apprentice
Joined: Feb 2005
Posts: 384
Likes: 0
How much power do you expect to be running?
Here's a direct link:
http://store.summitracing.com/partde...=KeywordSearch
It says it's a 14.6ohm, saturated circuit. IF that's not a misprint, those are more than double the size of the largest high-impedance injectors I've seen. I'm not an authority on injectors, but I'd go with low impedance on any injector that large. I would expect a 150# HighZ injector to be incredibly slow and sloppy.
Here's a direct link:
http://store.summitracing.com/partde...=KeywordSearch
It says it's a 14.6ohm, saturated circuit. IF that's not a misprint, those are more than double the size of the largest high-impedance injectors I've seen. I'm not an authority on injectors, but I'd go with low impedance on any injector that large. I would expect a 150# HighZ injector to be incredibly slow and sloppy.
04-29-2005 | 01:55 PM
#4
On The Tree
Joined: Sep 2004
Posts: 101
Likes: 0
From: J-VILLE FL
Originally Posted by Alex94TAGT
How much power do you expect to be running?
Here's a direct link:
http://store.summitracing.com/partde...=KeywordSearch
It says it's a 14.6ohm, saturated circuit. IF that's not a misprint, those are more than double the size of the largest high-impedance injectors I've seen. I'm not an authority on injectors, but I'd go with low impedance on any injector that large. I would expect a 150# HighZ injector to be incredibly slow and sloppy.
Here's a direct link:
http://store.summitracing.com/partde...=KeywordSearch
It says it's a 14.6ohm, saturated circuit. IF that's not a misprint, those are more than double the size of the largest high-impedance injectors I've seen. I'm not an authority on injectors, but I'd go with low impedance on any injector that large. I would expect a 150# HighZ injector to be incredibly slow and sloppy.
04-29-2005 | 02:05 PM
#5
On The Tree
Joined: Sep 2004
Posts: 101
Likes: 0
From: J-VILLE FL
Originally Posted by Alex94TAGT
How much power do you expect to be running?
Here's a direct link:
http://store.summitracing.com/partde...=KeywordSearch
It says it's a 14.6ohm, saturated circuit. IF that's not a misprint, those are more than double the size of the largest high-impedance injectors I've seen. I'm not an authority on injectors, but I'd go with low impedance on any injector that large. I would expect a 150# HighZ injector to be incredibly slow and sloppy.
Here's a direct link:
http://store.summitracing.com/partde...=KeywordSearch
It says it's a 14.6ohm, saturated circuit. IF that's not a misprint, those are more than double the size of the largest high-impedance injectors I've seen. I'm not an authority on injectors, but I'd go with low impedance on any injector that large. I would expect a 150# HighZ injector to be incredibly slow and sloppy.
05-02-2005 | 01:47 AM
#6
Originally Posted by 69firebird
there ford racing 150lbhr injectors
