Speed Inc Fuel Systems
Speed Inc Fuel Systems Does anyone have any experience with this product below? Is it hard to drill the stock tank? I am looking to be around 650hp and want to make sure the fuel system is right.
Speed Inc
Race Fuel System Kit - 1
700HP Race Fuel System, F-body for use with STOCK tank, requires drilling stock tank and installing a bulkhead fitting, includes:
-Bosch 420L 700+HP pump
-Billet Filter w/stainless element
-Billet Fuel Pressure regulator (boost ready)
-Billet LS1 or LT1 rails
-Autometer 0-100 Fuel pressure gauge
-All necessary braided lines and fittings
Includes everything needed from start-to-finish
-For Aeromotive Comp Eliminator pump, add $100
-Allow 2-3 weeks for delivery
itemno description price buy
FUELSYS1 Race Fuel System 1 $999.99
Thanks,
Kane
Speed Inc
Race Fuel System Kit - 1
700HP Race Fuel System, F-body for use with STOCK tank, requires drilling stock tank and installing a bulkhead fitting, includes:
-Bosch 420L 700+HP pump
-Billet Filter w/stainless element
-Billet Fuel Pressure regulator (boost ready)
-Billet LS1 or LT1 rails
-Autometer 0-100 Fuel pressure gauge
-All necessary braided lines and fittings
Includes everything needed from start-to-finish
-For Aeromotive Comp Eliminator pump, add $100
-Allow 2-3 weeks for delivery
itemno description price buy
FUELSYS1 Race Fuel System 1 $999.99
Thanks,
Kane
I have checked into this as well. It seems like the few I have talked with had mixed opinions on the bulk fittings.
I am having a hard time finding someone that makes the sumped tanks.
Nasty Performance is working on one with a sending unit for stock guage, but seems like he is too busy to get it going.
If you find anything, please let me know.
Thanks
I am having a hard time finding someone that makes the sumped tanks.
Nasty Performance is working on one with a sending unit for stock guage, but seems like he is too busy to get it going.
If you find anything, please let me know.
Thanks
I have done one plastic tank with a bulkhead fitting and it worked fine. It is not my personal choice, but it will work. Your guage will also act as normal -- its just a float -- as long as you don't damage it pulling it out.
As for the kit -- I purchased one of them awhile ago and was not impressed. There was not enough line to get from the front to the back for feed and return, and not enough fittings. And when called about the above and also for a general idea of how they preffered to route everything they were no help. I ended up having to spend another couple hundered bucks getting the necessary equipment to finish the job.
As for the kit -- I purchased one of them awhile ago and was not impressed. There was not enough line to get from the front to the back for feed and return, and not enough fittings. And when called about the above and also for a general idea of how they preffered to route everything they were no help. I ended up having to spend another couple hundered bucks getting the necessary equipment to finish the job.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo