Fueling & Injection Fuel Pumps | Injectors | Rails | Regulators | Tanks

which injector for me mototron #60 or siemens #60?

Thread Tools
 
Search this Thread
 
Old 06-22-2006 | 12:58 AM
  #1  
socalstreetracer's Avatar
Thread Starter
Launching!
iTrader: (4)
 
Joined: Jun 2003
Posts: 286
Likes: 0
From: valley village, los angeles
Default which injector for me mototron #60 or siemens #60?

I can get a cheap price on some siemens #60 injectors are these good injectors compared to mototron #60's?
Old 06-22-2006 | 11:23 AM
  #2  
Full Throttle's Avatar
FormerVendor
 
Joined: Dec 2004
Posts: 151
Likes: 0
Default

siemens makes mototron units
Old 06-23-2006 | 01:01 AM
  #3  
ZL1Killa's Avatar
TECH Resident

iTrader: (17)
 
Joined: Sep 2004
Posts: 3,747
Likes: 0
From: NC - Charlotte area
Default

what should i buy for my car, low impedence or high impedence? (I feel stupid for asking...) but i think high impedence

Last edited by ZL1Killa; 06-23-2006 at 01:06 AM.
Old 06-23-2006 | 08:45 AM
  #4  
Full Throttle's Avatar
FormerVendor
 
Joined: Dec 2004
Posts: 151
Likes: 0
Default

High impedence units will work with the stock computer. Low Impedence units ned a driver box installed as well
Old 06-23-2006 | 09:40 AM
  #5  
ZL1Killa's Avatar
TECH Resident

iTrader: (17)
 
Joined: Sep 2004
Posts: 3,747
Likes: 0
From: NC - Charlotte area
Default

with the motron 60#ers has anyone had an issue with them, just install them and change the IFR and shes' done?
Old 06-23-2006 | 12:35 PM
  #6  
Urban Legend's Avatar
TECH Cry Baby BOSS APPROVED!
iTrader: (5)
 
Joined: Jul 2005
Posts: 5,799
Likes: 2
Default

My former tuner could not figure out the tuning with the 60 lbs injectors. He is the only person I know that could not tune 60 lbs injectors.
Old 06-23-2006 | 12:57 PM
  #7  
ZL1Killa's Avatar
TECH Resident

iTrader: (17)
 
Joined: Sep 2004
Posts: 3,747
Likes: 0
From: NC - Charlotte area
Default

well does anyone have some personal experience here with tuning the 60# injectors? I would like to know if you need to adjust anything else on them as with my current racetronix injectors I need to change some other table so they don't rail at idle and cause my 1133 code




All times are GMT -5. The time now is 04:07 AM.