injector o ring
Thread Starter
On The Tree
Joined: May 2006
Posts: 104
Likes: 0
injector o ring Hi, im after a set of injector o rings... just spoke to a parts dealer in the UK and they want £80 for the set!!!! how much are you paying? anyidea where i may be able to get them else where? are they just a standard oring i can match up from a o ring kit?
regards
regards
I bought a complete set of 16 orings at the Chevy dealer for around $22.
I had previously purchased a set of 8 at AutoZone, but their OD was too small, much smaller than the orings I bought at the dealer.
I had previously purchased a set of 8 at AutoZone, but their OD was too small, much smaller than the orings I bought at the dealer.
TECH Enthusiast
Joined: May 2005
Posts: 689
Likes: 0
From: Perth, Australia
AC Delco Part No 12482706 should be for a set of 16.
Bosch Part number 1 280 210 752 would be for a single O Ring
From what I can gather the individual O Ring is 7.53mmID x 3.53mmCS in Viton 70.
Which equates to a BS203V70 from any seal shop.
Make sure to get Viton duro 70 ....and not nitrile or buna N material.
Bosch Part number 1 280 210 752 would be for a single O Ring
From what I can gather the individual O Ring is 7.53mmID x 3.53mmCS in Viton 70.
Which equates to a BS203V70 from any seal shop.
Make sure to get Viton duro 70 ....and not nitrile or buna N material.
TECH Resident
Joined: Aug 2003
Posts: 970
Likes: 4
From: England UK
Originally Posted by Ricky_GD
i found a componets store they matched upt he o ring for free. leak gone!!
