How to check for leaking injector?
Thread Starter
10 Second Club
iTrader: (22)
Joined: Mar 2006
Posts: 3,677
Likes: 2
From: Northwest side of Chicago
How to check for leaking injector? Im running svo 30 pounders. On cylinder #5 the plug is always soaked in gas.
I have a bad cold start issue. If i just turn key to start it will start fast and then die.
But if i hold the gas 1/4 throttle for 3-5 secs it will clear up and idle down nicley.
Hot starts are fine if it hasnt sat to long. I think #5 is leaking. How can i check, also has any one heard of 4k svos going bad?
I have a bad cold start issue. If i just turn key to start it will start fast and then die.
But if i hold the gas 1/4 throttle for 3-5 secs it will clear up and idle down nicley.
Hot starts are fine if it hasnt sat to long. I think #5 is leaking. How can i check, also has any one heard of 4k svos going bad?
or attach a fuel pressure gauge to the test port and see if the pressure drops. or swap the injector to another cylinder and see if the problem follows the swap to the other cylinder.
TECH Enthusiast
Joined: Jul 2006
Posts: 638
Likes: 0
From: San Diego
Originally Posted by slowpoke96z28
or attach a fuel pressure gauge to the test port and see if the pressure drops. or swap the injector to another cylinder and see if the problem follows the swap to the other cylinder.
