In the middle of install... Need help ASAP!

Reply Subscribe

Thread Tools

Search this Thread

Dec 2, 2006 | 01:29 PM

DOUBT IT

Thread Starter

11 Second Club

iTrader: (13)

Joined: Jul 2004

Posts: 1,511

Likes: 1

From: Central AL

In the middle of install... Need help ASAP!

Hey guys, I'm in the middle of my LS6 intake install, and found this on injectors 2 and 4...

Are these okay to go back in? I have no idea about what's fine when it comes to an injector. Please give an answer soon please guys.

Thanks in advance,
Allen

Dec 2, 2006 | 02:18 PM

Country Boy

Senior Member

iTrader: (24)

Joined: Nov 2001

Posts: 6,034

Likes: 1

From: Tampa, FL

did it run like that? If so, Id say stick them bank in for temp untill you can replace them.

Dec 3, 2006 | 07:53 AM

LS1MCSS

TECH Junkie

iTrader: (18)

Joined: Jan 2006

Posts: 3,831

Likes: 8

From: Dover, Arkansas

If you didn't plan on changing them, I say try it to see if they leak. The oring is what does the sealing and if it isn't damaged it should work. If they leak, they are easy to change.

Dec 3, 2006 | 08:43 AM

mikep2002

9 Second Club

iTrader: (10)

Joined: Apr 2006

Posts: 508

Likes: 1

From: Oxford, Chester County,Pa

Question where did those missing pieces go???

Dec 3, 2006 | 09:18 AM

otherwhitemeat

TECH Resident

iTrader: (3)

Joined: Oct 2006

Posts: 758

Likes: 1

i believe you dont need that parts of the injector on, the o-ring will seal regardless.......mine dont even have that ring

Dec 3, 2006 | 10:10 AM

2fast4u2catch

On The Tree

iTrader: (1)

Joined: Sep 2006

Posts: 112

Likes: 0

yeah im with mikep id be more worried about that piece floating around in my motor

Dec 4, 2006 | 07:29 PM

DOUBT IT

Thread Starter

11 Second Club

iTrader: (13)

Joined: Jul 2004

Posts: 1,511

Likes: 1

From: Central AL

Thanks to all that replied. I figured it out with some thorough searching. I pulled what remained of them off on 2 and 4, oiled up the o-rings, and put it all back together.

I noticed that the bottom of the injector ports on the LS6 don't seem to have the little retainers like the LS1 intake does.

I vaccummed out the ports thoroughly and heard when the pieces got sucked into the tube. I made damn sure that I didn't have any stray pieces of plastic in the motor.