Where to mount inline pump and relay
Thread Starter
TECH Junkie
iTrader: (71)
Joined: Mar 2002
Posts: 3,703
Likes: 0
From: East Brady, Pa
Where to mount inline pump and relay I have a walbro inline pump ready for install. I was just curious where the best spot is to mount the pump. I have the tranny and rear off the car so I'm not able to tell where I will have room. I also have a relay for it and my intank to mount. Thanks for any help.
TECH Apprentice
Joined: May 2002
Posts: 383
Likes: 0
From: Jacksonville
Re: Where to mount inline pump and relay Man.. What is up with this site that nobody replies to posts anymore!.
Anyhow, You should see like a cross brace just over where the Axle, Fuel Lines/RElay box is. I had mine there and it worked out fine. Put it close to Fuel Relay box.. You'll see a couple connectors there, Can't miss it.
GL!
Anyhow, You should see like a cross brace just over where the Axle, Fuel Lines/RElay box is. I had mine there and it worked out fine. Put it close to Fuel Relay box.. You'll see a couple connectors there, Can't miss it.
GL!
Re: Where to mount inline pump and relay I mounted mine on the bend under the rear driver side seat. It's about 4 inches above the fuel filter and spliced in to the main plastic fuel line. Worked great! Good luck!
Jeffrey
Jeffrey
