Injector pulling time!!!
Thread Starter
TECH Fanatic
iTrader: (1)
Joined: Mar 2002
Posts: 1,500
Likes: 0
From: Bellevue, Nebraska
Injector pulling time!!! How tough to pull my old injectors, and install the new SVO ones?
Any links for directions? Or is it pretty straight forward, pull and replace?
Any links for directions? Or is it pretty straight forward, pull and replace?
Launching!
Joined: Jul 2002
Posts: 260
Likes: 6
From: Pittsburgh, PA
Re: Injector pulling time!!! Pretty easy, just pull and replace. Make sure the old o-rings don't get stuck in the fuel rail before installing the new ones. I did mine when istalling the ls6 valley cover and pcv system so I had the intake and fuel rails off the car already.
Matt
ps- Nice pic beside all the cop cars!!!
Matt
ps- Nice pic beside all the cop cars!!!
Thread Starter
TECH Fanatic
iTrader: (1)
Joined: Mar 2002
Posts: 1,500
Likes: 0
From: Bellevue, Nebraska
Re: Injector pulling time!!! Well crap. For the life of me I cant get the rear fuel rail bolts out under the freaking cowl!!!
I even tried a swivel, and my socket is too tall. Have to call in a fellow LS1 guy with better tools for this project. What a PITA!!!!
I even tried a swivel, and my socket is too tall. Have to call in a fellow LS1 guy with better tools for this project. What a PITA!!!!
Thread Starter
TECH Fanatic
iTrader: (1)
Joined: Mar 2002
Posts: 1,500
Likes: 0
From: Bellevue, Nebraska
Re: Injector pulling time!!! Done. Injectors on thier way to California. 30# SVO's going in!!!!
I was trying to get the wrong bolt off, it was easy as hell. I thought there was another bracket/fuel rail bolt at the back. Just had to pop the rails up. Firm but gentle pull.
I was trying to get the wrong bolt off, it was easy as hell. I thought there was another bracket/fuel rail bolt at the back. Just had to pop the rails up. Firm but gentle pull.
