tfreer85

My apologies to those who might have looked for "Accurate Injection." "Accurate Injection" is the screenname of the guy I deal with on Hybridz.org . The company that provided me my ITB's is extrudabody and here is their website http://www.extrudabody.com/ . Again sorry for any confusion,

Tyson

pHEnomIC

iTrader: (14)

I am confused, what are itbs and what do they do? i can tell its something related to intake...

j200pruf

iTrader: (1)

Individual Throttle Bodys. So instead of a stock intake with one throttle body that feeds all cylinders, an ITB set up has one throttle for each cylinder.

Beast96Z

iTrader: (21)

Wow, those runners are extremely short. Wonder how that is going to affect this low end grunt your looking for. That's why I bought the Harrop. It still retains long runners. However, it is a nice looking setup for the price.

tfreer85

Yeah that is one concern I've had raised a couple of times, best way will be for me to get in the car and ran. The good thing about extrudabody is they offer extensions from 3" to 9" for me to get it dialed in perfectly if its too short now. http://extrudabody.com/Products/Accessories.html

Tyson

Kamin

i demand video of these on the car

now.

grubinski

Bump.

Any new status on this project?

tfreer85

actually yes there is the car is at a shop getting professional work done to it. I ran out of time, so took it to a shop for finishing. it should be done in about a month to a month and a half.


tyson

DeepV

iTrader: (1)

Har, Video please! If it looks that sexy, i can't wait to hear it!

project_re

iTrader: (1)

well where is the video

tfreer85

No video, project delayed by shop moving and well life, but here are some pics.









Tyson

SLawson86

iTrader: (8)

sweet project man... keep us posted with pics

cnichols

iTrader: (23)

UPDATES!!! I'm really interested in doing this and in fact, spoke with them about these ITBs last winter, but the wallet couldn't support them. I'm really thinking about going this direction in the future and would love to see how they work out for you.

Love the original Zs...beautiful.

NemeSS

iTrader: (127)

DAM COOL!
just stumbled on this thread.
thats the setup i would run on my pipe dream GTM car build
along with a destroked ls3.

back on topic:
updates?

LSxPwrDZ

iTrader: (4)

Same here. I'd like to get my hands on a set of those ITB's. I bet it would be a nightmare to tune with the stock ECU though

Grn4fbody

iTrader: (2)

Looks sweet man!

tfreer85

Just a small update. Ordered HPtuners to tune the setup, switching to speed density. According to the shop should be up and running in the next 2 weeks.

Tyson

MiaSSmaro98

iTrader: (9)

sweet wat was the cost?

tfreer85

hptuners came out to be around 550 including shipping + tax, not too bad considering it has the scanner function as well. Opted to do HPtuners over LS1edit.

Tyson

LS6427

iTrader: (2)

Can you tell me what the length of the tubes are without any of the extensions installed?

Then, what lengths can be had using the different extensions?

Thanks