I am trying to cobble together a dual in tank walbro pump setup to complement my turbo setup.

I am going to go 5/16 hose from the pumps into a Y (5/16 to 1/2).

I can't seem to find a source for the Y fitting anywhere??

Also, from the Y I will eventually go into a AN8 bulkhead fitting. The bulkhead fitting I got, cannot seem to figure out how to go into the AN8 bulkhead fitting without going through two connectors. The first connector a 1/2 barb hose to AN8, then a female to female AN8 coupler, and finally the AN8 bulkhead.

I'd really like to not have to go through 2 fitting to get to the bulkhead.

Thanks,
Jeff

 

I got a y block off ebay...they're not cheap though. sounds like a bunch of fittings but there probably isn't another way without going all braided line.

 

Take your pick!!!! some of these have the included barbed fittings for regular hose some you will have to buy the fittings, they are cheap.

http://www.jegs.com/webapp/wcs/store...10295_-1_10267