Problem with sway bar on 12 bolt
02-11-2009, 05:24 PM
#1
11 Second Club
Thread Starter
iTrader: (1)
Join Date: Jul 2006
Location: St. Louis, MO
Posts: 270
Likes: 0
Received 0 Likes
on
0 Posts
Problem with sway bar on 12 bolt I have the kit from spohn to make the stock swaybar work with the 12 bolt axle tubes. The problem I am running into is that the part that goes under the axle tubes, the bolt holes don't line up with the spohn adapter, it's too small. Does anyone know where I can get a part that works.
In this link, it's the first on-car pic, the piece that connects and has the red bushing in it is the piece that isn't lining up.
http://marylandspeed.com/spohn-after...01-p-1684.html
In this link, it's the first on-car pic, the piece that connects and has the red bushing in it is the piece that isn't lining up.
http://marylandspeed.com/spohn-after...01-p-1684.html
02-13-2009, 04:55 PM
#3
11 Second Club
iTrader: (34)
Join Date: Feb 2005
Location: Ft. Wayne, Indiana
Posts: 3,158
Likes: 0
Received 0 Likes
on
0 Posts
Are you saying the bracket that goes around the bushing doesn't line up with the Spohn adapter. 
If so just drill out the bracket holes a little bigger.
If so just drill out the bracket holes a little bigger.