DAMN Moser to HELL!!!!!
Thread Starter
8 second mod
iTrader: (37)
Joined: Nov 2002
Posts: 17,879
Likes: 1
From: East Side Performance! mASShole
DAMN Moser to HELL!!!!! I twisted the untwistable 30 spline in my moser, they charged me for a new one! 
I got it in at about 12:30 tuesday night, Then Went to the track wednesday and 
Did the burn out, rev it up green light, dump clutch, 
Got home pulled the cover and most of the rear fell out with the oil!!
So looks like the 30 splines are coming out, 33 going in along with a spool!(Strange that is, Gun drilled, No more screwin around!)
I should be up and running in a couple days.
Another $$$$ day at the track.
I also cracked the yoke right in half and smashed the u joint!
It held for about two years, But that was with chicken tires and 1.7 60', Now with traction it only took 6 passes in the 1.55-1.68 60'
OH well, part of racing.
I got it in at about 12:30 tuesday night, Then Went to the track wednesday and Did the burn out, rev it up green light, dump clutch,
Got home pulled the cover and most of the rear fell out with the oil!!So looks like the 30 splines are coming out, 33 going in along with a spool!(Strange that is, Gun drilled, No more screwin around!)
I should be up and running in a couple days.
Another $$$$ day at the track.
I also cracked the yoke right in half and smashed the u joint!
It held for about two years, But that was with chicken tires and 1.7 60', Now with traction it only took 6 passes in the 1.55-1.68 60'
OH well, part of racing.
Thread Starter
8 second mod
iTrader: (37)
Joined: Nov 2002
Posts: 17,879
Likes: 1
From: East Side Performance! mASShole
Re: DAMN Moser to HELL!!!!! Well, I'll let you know how the spool works out.
Im hoping to have the hole thing apart tonight, get the parts tommorow, and back together this weekend.
we shall see.
I got the Camaro Firebird shootout next sunday i need to be ready for.
Im hoping to have the hole thing apart tonight, get the parts tommorow, and back together this weekend.
we shall see.
I got the Camaro Firebird shootout next sunday i need to be ready for.
11 Second Club
Joined: Nov 2001
Posts: 1,645
Likes: 0
From: Hanover MD
Re: DAMN Moser to HELL!!!!! i hear ya!
i want to get mine back up and running asap, i want to try for a 10.50 before i do the !clutch mod.
if the 9 inch will hold together, it might happen. hope you do well at the shootout next weekend!
i want to get mine back up and running asap, i want to try for a 10.50 before i do the !clutch mod.
if the 9 inch will hold together, it might happen. hope you do well at the shootout next weekend!
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo Thread Starter
8 second mod
iTrader: (37)
Joined: Nov 2002
Posts: 17,879
Likes: 1
From: East Side Performance! mASShole
Re: DAMN Moser to HELL!!!!! NO 9" In my car!!!!!
FORD product!!
Id rather replace my 12 bolt 10 times!! J/K
I think the spool with 33 splines will do the trick!
FORD product!!
Id rather replace my 12 bolt 10 times!! J/K
I think the spool with 33 splines will do the trick!
Thread Starter
8 second mod
iTrader: (37)
Joined: Nov 2002
Posts: 17,879
Likes: 1
From: East Side Performance! mASShole
Re: DAMN Moser to HELL!!!!! The tire wear isnt that bad, Ny buddys car Has had his et streets on all year, he has prob 50 passes on them, and 3-5k miles on the street. They are still good.
Im not worried about $300 a year on tires, but $1000 a year bon a rebuild sux!!!
Im not worried about $300 a year on tires, but $1000 a year bon a rebuild sux!!!
Thread Starter
8 second mod
iTrader: (37)
Joined: Nov 2002
Posts: 17,879
Likes: 1
From: East Side Performance! mASShole
Re: DAMN Moser to HELL!!!!! Well, it will be a little longer then I thought.
I had to order the parts, and the Billit yoke has to be made. They said 3 weeks. But when you want it bad it dont matter. I think i worked around the 3 week thing$$$$$$$$$$
:p
I'll let you know about the spool. But ive heard all good things so far from everyone running them! Cant wait.
I had to order the parts, and the Billit yoke has to be made. They said 3 weeks. But when you want it bad it dont matter. I think i worked around the 3 week thing$$$$$$$$$$
:pI'll let you know about the spool. But ive heard all good things so far from everyone running them! Cant wait.
11 Second Club
Joined: Nov 2001
Posts: 1,645
Likes: 0
From: Hanover MD
Re: DAMN Moser to HELL!!!!! that sucks about the parts! i know you wanted to run the shootout. on a brighter note, i picked up the 9 inch last night and it looks like rain tonight so the f-body wars at mir will get moved and i can possibly make it!
Thread Starter
8 second mod
iTrader: (37)
Joined: Nov 2002
Posts: 17,879
Likes: 1
From: East Side Performance! mASShole
Re: DAMN Moser to HELL!!!!! It does suck about the parts, But i will be doing the shootout!!!At least I'll do my best to get it done. Like I said, A little extra $$$$ you can get things done faster :p
Good luck with the 9", It might slow you down a bit (Ford Product) did you stick with the same gears? What gears are you running? And what do you cross the traps at RPM wise? Im @ around 6,000 going threw the traps and I shift @ 6,200. 3:73's seem like the best I can get till I go faster, then its to 3:55.
Good luck with the 9", It might slow you down a bit (Ford Product
) did you stick with the same gears? What gears are you running? And what do you cross the traps at RPM wise? Im @ around 6,000 going threw the traps and I shift @ 6,200. 3:73's seem like the best I can get till I go faster, then its to 3:55. 11 Second Club
Joined: Nov 2001
Posts: 1,645
Likes: 0
From: Hanover MD
Re: DAMN Moser to HELL!!!!! i had 4.10's in the 12 bolt, and in the 9 inch i got 3.89's. with the 4.10's i was crossing around 6500, but since i want to step up on the shot later, i wanted the 3.89's and a 28 inch tire.
Thread Starter
8 second mod
iTrader: (37)
Joined: Nov 2002
Posts: 17,879
Likes: 1
From: East Side Performance! mASShole
Re: DAMN Moser to HELL!!!!! Cool, I think I'll just stick with my 3.73's, Im hoping to be in the 130mph mark by next spring, So I dont want to over rev. 3.73's seem to work out well for me anyway.
Thread Starter
8 second mod
iTrader: (37)
Joined: Nov 2002
Posts: 17,879
Likes: 1
From: East Side Performance! mASShole
Re: DAMN Moser to HELL!!!!! Evil, I saw in another post, you need LCA's,Give EastSide a call. They have a ballz set up. I run them in my car, they are soooo sweet. They also have the same pan hard rod. They are great, Nice and light. I hade them weld in the lca relocations and then they squared the car. What a good job they did. I had BMR in their, and these are much much nice. I know they are 6 hours from you, But It might be worth a call, and have them installed somewhere ealse.
Just a little info. Good luck.>>>>>>>>>>
Just a little info. Good luck.>>>>>>>>>>