bottelfed377

377ci+200-300 shot out of the hole+ th400 4400 stall+ stock rearend= i cant believe its still alive

mark a

i have a 02 pewer z28 it has a cam stall 100 shot an a stock 10 bolt with 323 gears on motor 11.80 at 115 an on the juice 10.80 at 125.

joeytransam

i bought the car new in 02 and have been abusing the rear since ive done well over 100 quarter mile launches and multiple burnouts including powershifting so far so good all i do is change the oil and gasket every year and keep and eye on the pinion seal my boy has a 99 a4 and tore the rear apart with hardly any abuse he got a dana s 60 and i must say its better then i coulda ever expected since then ive been taking it easy and not testing my luck since i have a dana s60 410 on the way this month

dschmittie1

iTrader: (64)

MY 3.42 geared 10 bolt with a TA girdle took 605rwhp and 10.5@136mph with a 1.67 60' Before I made the Switch to a Fab 9 OH yeah and its an M6

Full-Force

iTrader: (11)

Bolt a set of slicks on it and take it to the track and side step the clutch at 6000 rpms. I bet you the car doesnt move one inch.

slw ls1

iTrader: (6)

I got in roughly 15 passes on 315/35R15 MT DR's with just bolt on's. My car is probably putting down 325-350 to the wheels. I put in an LS7/LS2 clutch/flywheels and slapped on some 16" Hoosier cheater slicks, snapped on my first launch. I only launched at 2.5k, mabey 3k, it hooked, and something snapped , not sure what yet I havn't had a chance to pull the cover off The rear end only has ~50k on it, it was replaced at 6k. It also had no signs that it was going out. I told my buddy that day I was either gonna run a 12 or snap my rear end, not sure which but I was gonna do one of the two .