2grand really ??
2grand really ?? well i am seeing for us guys with the gm 10 bolt we are in trouble when it comes time to upgrade!! Are our only options to spend 2k or more on a 12 bolt or a 9 in to bolt right in??
What's that saying... "you have to pay to play" or perhaps the infamous "you get what you pay for." You can keep replacing the 10 bolt with a used one for roughly $200. Or drop big coin on a quality piece that will more than likely last for the rest of the cars life. Good luck man. I know it sucks, but at least after doing it you don't have to worry about grenading the 10 bolt every time you leave the starting line.
I have 2500 in mine, now going with a full MWC rear and suspension, dont ask what that cost haha. But i think my new rear is some of the baddest parts i can get for my street strip car for the price and should help me reach my goal of the car easier.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
yeah and if u get upgrades for the rear like powder coating,aluminum center section ect,then the price can easily get over 3k.Plus u will need a stronger driveshaft when doing a rear,so another 400 for a decent upgraded one,mine as well get some good lower control arms for the new rear while its out,another 250.Oh and some nice et streets for the back so that traction can now be used with a strong rear.+410.It gets over 4k real quick,so save save save,and pray your wife will let u get it after you have saved.Mine told me i SHOULD get it,but i started smoothing her over about it 2 years ago haha
So if you can find one for 2 grand good deal. but i know i guy that bought a housing and axle package and build a junkyard 3rd member and built it for 1400 bucks. but you get what you pay for kind of thing..
I bought a used Moser 12 bolt from a member on here for under $2K...just have the money ready, be patient and online checking the parts section constantly.
The nice thing about a used one,they already have the backing plates and axles installed.
The nice thing about a used one,they already have the backing plates and axles installed.
yeah these things get quite pricey. I'd say you are looking to spend about $3100-3300 for a fab 9" with driveshaft and tq arm. Eric at MWC does great work and can get you what you want. You might be able to find one used if you are lucky but if you are going to drop a couple thousand might as well go with a new one.
