LS1TECH - Camaro and Firebird Forum Discussion

Gears & Axles Driveshafts | Rearends | Differentials | Gears | 12 Bolt | 9 Inch | Dana

9" rearend which yoke?

Thread Tools
 
Search this Thread
 
Old 12-20-2010 | 05:53 PM
  #1  
MUSTANGBRKR02's Avatar
MUSTANGBRKR02
Thread Starter
12 Second Club
iTrader: (91)
 
Joined: Aug 2006
Posts: 4,599
Likes: 5
From: Maine
Default 9" rearend which yoke?
What is the standard yoke used on fbody's? Is it short or long? Thanks everyone.
Reply Like
Old 12-20-2010 | 06:50 PM
  #2  
Intercooler2's Avatar
Intercooler2
11 Second Club
iTrader: (24)
 
Joined: Mar 2008
Posts: 2,554
Likes: 2
From: North East, MD
Default
I have the 1" longer yoke.
Reply Like
Old 12-20-2010 | 07:07 PM
  #3  
Zmg00camaross's Avatar
Zmg00camaross
10 Second Club
15 Year Member
iTrader: (11)
 
Joined: Jun 2009
Posts: 5,056
Likes: 49
From: Missouri
Default
I used a 1330 yoke and worked with my stock ujoint, But most ppl used the 1350 yoke which you should use a 1 inch longer driveshaft I do believe.
Reply Like
Old 12-20-2010 | 07:14 PM
  #4  
98Camarod's Avatar
98Camarod
11 Second Club

iTrader: (43)
 
Joined: Aug 2006
Posts: 5,364
Likes: 2
From: Summerville, SC
Default
I used 1350. But whatever you do, measure it. What works for everyone else may not work for you.
Reply Like
Old 12-20-2010 | 08:12 PM
  #5  
MUSTANGBRKR02's Avatar
MUSTANGBRKR02
Thread Starter
12 Second Club
iTrader: (91)
 
Joined: Aug 2006
Posts: 4,599
Likes: 5
From: Maine
Default
i'm not asking what size u joint but what size yoke since there are different lengths for them IE 1 longer 3 inch longer. like the first response.
Reply Like
Old 12-21-2010 | 03:02 AM
  #6  
need4fun2469's Avatar
need4fun2469
TECH Apprentice
15 Year Member
 
Joined: Jun 2009
Posts: 370
Likes: 0
From: Garland, TX
Default
I have a 1350 yoke and factory ds works just fine. You will need to buy a u-joint conversion that has 1350 on one end and 1310?(factory) on the other end.
Reply Like
Old 12-21-2010 | 03:34 AM
  #7  
98Camarod's Avatar
98Camarod
11 Second Club

iTrader: (43)
 
Joined: Aug 2006
Posts: 5,364
Likes: 2
From: Summerville, SC
Default
Originally Posted by MUSTANGBRKR02
i'm not asking what size u joint but what size yoke since there are different lengths for them IE 1 longer 3 inch longer. like the first response.
when I had the 4l60e I didn't change anything except the u joint to have the conversion u joint.
Reply Like

Trending Topics

Old 12-21-2010 | 12:15 PM
  #8  
MUSTANGBRKR02's Avatar
MUSTANGBRKR02
Thread Starter
12 Second Club
iTrader: (91)
 
Joined: Aug 2006
Posts: 4,599
Likes: 5
From: Maine
Default
I have a th400 and a chromoly spohn DS now. I am building my own third member from scratch. Just wondering what length yoke everyone has. Not u-joint size.
Reply Like
Old 12-21-2010 | 03:45 PM
  #9  
armyboyatc's Avatar
armyboyatc
TECH Fanatic
iTrader: (29)
 
Joined: Feb 2009
Posts: 1,063
Likes: 15
From: Olive Branch, MS
Default
Putting a 9" in a camaro requires you to do one of two things. 1) buy a 1" longer yoke or 2) buy a 1" longer driveshaft. If you plan to use the stock drive shaft the just buy the 1" longer yoke.
Reply Like
Tags
Back to Subforum
Gears & Axles
View Next Unread
Well the Detroit Locker is in... may video later




Advanced Search

All times are GMT -5. The time now is 11:00 AM.