98-02 Moser 12-bolt with 93-97 brakes?
#1
TECH Fanatic
Thread Starter
iTrader: (6)
Join Date: Aug 2006
Location: Charleston, S.C.
Posts: 1,213
Likes: 0
Received 0 Likes
on
0 Posts
98-02 Moser 12-bolt with 93-97 brakes?
I recently picked up a 12-bolt that came out of an LS1 f-body... it has the LS1 backing plates and e-brake drum installed on it already.
What are you guys doing to install LT1 brakes? I know I would need to press the bearings in order to swap backing plates, but I thought I saw something about needing to run shims on the axles.
I want to do this as smoothly as possible and I am starting to think it might be easier to put LS1 brakes on it.
Anyone have a write up or detailed information on what my options are.
Thanks in advance.
What are you guys doing to install LT1 brakes? I know I would need to press the bearings in order to swap backing plates, but I thought I saw something about needing to run shims on the axles.
I want to do this as smoothly as possible and I am starting to think it might be easier to put LS1 brakes on it.
Anyone have a write up or detailed information on what my options are.
Thanks in advance.
#2
LS1Tech Sponsor
iTrader: (16)
This diagram shows the 1/8" shims. Bob
__________________
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website