what gears do i have
Thread Starter
Teching In
Joined: Oct 2012
Posts: 33
Likes: 0
From: the bay, california
what gears do i have Just bought a 98 ws6 but dnt know what differential gears i have it gots a summit racing cover on the differintial and da owner said it wasnt stock how can i find out
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo Thread Starter
Teching In
Joined: Oct 2012
Posts: 33
Likes: 0
From: the bay, california
Well i use it just on saterdays and sunday when its sunny i dyno tested it and it has 505 hp and 565 tq and it great on gas get over 18 mpg in city so i guess ill keep those 373 gears i guess it just has a lower top speed than 410
Thread Starter
Teching In
Joined: Oct 2012
Posts: 33
Likes: 0
From: the bay, california
Mmm the guy i bought it from said the engine was tune new cam and heads and portes and it has longtube headers with straight pipes no cats and it is set up to take nos but never have use it all i need is to buy a nos tank and i know the suspension and the bottom of tge car is reinforced so it wont bend and some other stuff that to tell u the true i cant remember cuz i was to happy that i was getting it for $5800
This would put you right at a 4.10 gear. Assuming you have a stock size tire and were in 6th gear.
If the op was in 6th gear when he took the reading then he'd be right around 85 with 3.73 at that rpm it sounds like he has 4.10s
Not really 3.73's wouldnt be much difference over stock and wouldnt be worth it, 4.10s are the go to gear with an m6 so that makes sense it would have those
If the op was in 6th gear when he took the reading then he'd be right around 85 with 3.73 at that rpm it sounds like he has 4.10s
Not really 3.73's wouldnt be much difference over stock and wouldnt be worth it, 4.10s are the go to gear with an m6 so that makes sense it would have those
Put rear of car on jack stands, put car in neutral, mark driveshaft, have buddy spin tire one full revolution and count the revolutions of the driveshaft.
Quick and accurate determination.
Quick and accurate determination.
Thread Starter
Teching In
Joined: Oct 2012
Posts: 33
Likes: 0
From: the bay, california
This would put you right at a 4.10 gear. Assuming you have a stock size tire and were in 6th gear.
If the op was in 6th gear when he took the reading then he'd be right around 85 with 3.73 at that rpm it sounds like he has 4.10s
Not really 3.73's wouldnt be much difference over stock and wouldnt be worth it, 4.10s are the go to gear with an m6 so that makes sense it would have those
If the op was in 6th gear when he took the reading then he'd be right around 85 with 3.73 at that rpm it sounds like he has 4.10s
Not really 3.73's wouldnt be much difference over stock and wouldnt be worth it, 4.10s are the go to gear with an m6 so that makes sense it would have those
