is this the correct install kit for moser 9"?
is this the correct install kit for moser 9"? installing some new richmond gears in my moser build 9" rear. The first kit i ordered from summit had the smaller carrier bearings in it which were too small for my 3rd member. here is the kit im looking at, but i cant find any specs on the bearings it comes with to confirm it will work.
http://www.summitracing.com/parts/rmg-8310051/overview/
here is the numbers and measurements from my old races/bearings
carrier bearings LM104911 3.250" OD
pinion inner bearing HM89410 3" OD 7/8" depth
pinion outer bearing M88010 2 3/4" OD 11/16" depth
pinion has 28 splines
using 35 spline axles
any help or info would be much appreciated
http://www.summitracing.com/parts/rmg-8310051/overview/
here is the numbers and measurements from my old races/bearings
carrier bearings LM104911 3.250" OD
pinion inner bearing HM89410 3" OD 7/8" depth
pinion outer bearing M88010 2 3/4" OD 11/16" depth
pinion has 28 splines
using 35 spline axles
any help or info would be much appreciated
