little help please on wheel stud install
#1
little help please on wheel stud install,drill bit size for 5/8" knurl????
have arp 3" studs and knurl size diameter is 5/8" , so on the moser axles what size drill bit do i use for the correct fitment???? any help thks much!!!!
Last edited by more carbon; 06-25-2004 at 09:21 PM.
#2
TECH Enthusiast
iTrader: (2)
Join Date: Nov 2001
Location: Chandler, AZ
Posts: 637
Likes: 0
Received 0 Likes
on
0 Posts
I bought mine from Thunder Racing, I assume they are the same ones you bought. I checked their site and it does not say what diameter they are at the splines/knurl.
I didn't drill anything. I just cranked 'em down until they seated.
I didn't drill anything. I just cranked 'em down until they seated.
#5
TECH Enthusiast
iTrader: (2)
Join Date: Nov 2001
Location: Chandler, AZ
Posts: 637
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by more carbon
my moser came with stock diameter studs and i went to a 3" stud so the knurl diameter is bigger,it's 5/8" . so do you drill a hole about 20 thou smaller??