BlackScreaminMachine

iTrader: (17)

I got about 300 miles on my Moser 12 bolt with the TrueTrac diff, 3.42 gears, 33 spline axles, aluminum perf. diff cover etc etc.

I have not done a burnout yet, but just driving her and hitting it hard from down low. She moves out nicely and hooks hard. I am very impressed with it.

Tommorrow I am rechecking my suspension and making sure its tight and I got -2 degree pinion angle set on my tq arm. Then on Wednesday its off to the track. I want to hit 11's and a 1.6 or lower 60 foot. We will see. At least i wont care since I also got a 3" steel n20 ready DS thats custom measured for the rear

1ScrudeDude

You mean "WHEN"...

Turo

iTrader: (23)

Question: Can the ABS/TCS still work normally with a truetrac?

z-ya

iTrader: (1)

4 channel for sure will work,don't know if the diffy will accept the reluctor ring though.

z-ya

iTrader: (1)

Detroit now says the 4 series carrier won't be avalable until winter.BOOOOOO

BlackScreaminMachine

iTrader: (17)

Screw ABS, it never worked in my car since i have owned it. I saved the 100 or so bucks by not having it put in. When I got the car running the ABS inop light never came on. So oh well.

1ScrudeDude

This is actually good news fellas.

When I spoke to them 3 months ago, they said they scrapped the 4 series altogether.

v8maro

iTrader: (4)

You guys should PM 1bad86z about 12's + 9's with trutrac's. He builds them.
-Steve

ls1king000

iTrader: (20)

Bringing back this thread. Want to see if anyone has a 9" with true trac AND 33 spline ??? I see the 12-bolts with 33's and true trac but, not a friggin 9" ??? If it's true than what limited slip to get????
thanks

97M6Formula

iTrader: (6)

I have the true trac with 31 spline no problems yet although the car hasnt been out since winter hit but in the summer it was real quiet and felt nice...I have 3.90s in there

ninobrn99

iTrader: (8)

i have the same.. a 9" trutrac with 3.90's 31 spline. as far as i know, they only work with 31 spline. i could be wrong, but thats what i was told.

Turo

iTrader: (23)

For a 9" with a truetrac, your choices are either 28 or 31 spline, no 33. Someone correct me if I'm wrong. 31 spline should hold plenty of power when set up corectly, though, so I wouldn't think twice about putting in 31 spline axles unles you're making SERIOUS horsepower, in which case you'd probably be better off going straight to a 35 spline and a locker/spool.

Viper

iTrader: (6)

That new Dana S60 is 35 spline with TruTrac, sounds promising, waiting to see how people like it.

35thls1ss19

iTrader: (1)

i have a 9'' with 31 splline and it works great!! about 1000 miles on it and alot of good launchs

ninobrn99

iTrader: (8)

i would've gone with the dana if i jnew it was out, but then again, it is heavier than both the 12 bolt and 9"

ls1king000

iTrader: (20)

Well I def want a limited slip I'll keep my eye on dana
31 spline seems fine for me really
thanks everyone